Download Multitech MTCBA-C-IP-N1 Specifications

Transcript
CUSTOM AT COMMANDS
Read command reports the duration in ms of the pulse generated, in the format: #PSMRI: <x> Test command reports the supported range of values for parameter <x> Syntax Command Command type AT#PSMRI= <x> Set #PSMRI? Read #PSMRI =? Test Parameters and Values <x> 0 50‐1150 RI enabling. Disables RI pin response for URC message. Default: 0. Enables RI pin response for URC messages. Notes „
„
„
The behavior for #PSMRI is invoked, only when modem is in sleep mode (AT+CFUN=7) The value set by command is stored in the profile extended section and does not depend on the specific AT instance. When RING signal from incoming call/SMS/socket listen is enabled, the behavior for #PSMRI is ignored. Report Concatenated SMS Indexes #CMGLCONCINDEX The command reports a line for each concatenated SMS containing: #CMGLCONCINDEX: N,i,j,k,... where N I,j,k The number of segments that form the whole concatenated SMS. The SMS indexes of each SMS segment , 0 if segment has not been received. If no concatenated SMS is present on the SIM, only OK result code is returned. Test command returns OK result code. Syntax Command Command type AT#CMGLCONCINDEX AT#CMGLCONCINDEX=? Test Examples at#cmglconcindex
#CMGLCONCINDEX: 3,0,2,3
#CMGLCONCINDEX: 5,4,5,6,0,8
OK
HSPA+ AT Commands Reference Guide 190