1
Download Bantam BC8HP Operating instructions
Transcript
Program flow chart LiPo/LiFe/LiIo PROGRAM UP ENTER Charge current 0.1~9.0A CHARGE DOWN UP Charge mode Normal/Balance/Fast DOWN UP DOWN End current Auto, 60~500mA UP UP Safety temp. 20~80C MODE UP DOWN DOWN Maximum capacity 50~120% DOWN Charge current 0.1~9.0A STORAGE UP Safety timer 10~9990 min. UP Discharge current 0.1~5.0A DOWN UP DOWN UP DOWN Check Time 5~250 min. End current Auto, 60~500mA UP UP Safety temp. 20~80C MODE UP UP Discharge current 0.1~5.0A DISCHARGE DOWN DOWN Safety timer 10~9990 min. Discharge volt 2.70~3.70V/cell DOWN UP DOWN UP DOWN Safety temp. 20~80C NiCd/NiMH PROGRAM Safety timer 10~9990 min. DOWN UP CHARGE DOWN Charge current 0.1~9.0A UP DOWN UP DOWN Maximum capacity 50~120% Charge mode Normal/Linear/Reflex UP DOWN Discharge mode Normal, CV mode UP Safety temp. 20~80C UP DOWN UP Safety timer 10~9990 min. UP Current mode Manual/Auto DOWN DOWN Maximum capacity 50~150% DOWN End current Auto, 60~500mA UP MODE DOWN Maximum capacity 50~120% UP UP DOWN UP DOWN DOWN Delta-peak Disable/Delicate/ 5~20mV/cell DOWN Trickle current Off/50~300mA UP DISCHARGE DOWN UP DOWN Delta-peak delay 1~15min. UP Discharge current 0.1~5.0A Discharge mode Atuo/Manual DOWN UP Discharge volt 0.10~1.20V/cell DOWN UP Safety temp. 20~80C MODE DOWN Safety timer 10~9990 min. UP UP Cycle Mode CYCLE UP DOWN DOWN -6- No. of cycles 1~10 times UP DOWN Maximum capacity 50~150% DOWN UP DOWN Waste time 0~60 min.
