Download Craftsman 580.752211 Operating instructions

Problem
Pump has following problems:
failure to producepressure,
erratic pressure, chattering, loss
of pressure, low water volume.
Detergent fails to mix with spray.
Engine runsgood at no-load but
"bogs" when load is added.
Cause
Correction
1.
Low pressure nozzle installed.
1.
Replacewith high pressure nozzle.
2.
Water inlet is blocked.
2.
Clear inlet.
3.
inadequate water supply.
3.
Provide adequatewater flow.
4.
inlet hose is kinked or leaking.
4.
Straighten inlet hose, patch leak.
5.
Clogged inlet hose strainer.
5.
Checkand clean inlet hose strainer.
6.
Water supply is over IO0°F.
6.
Provide cooler water supply.
7.
High pressure hose is blocked or
leaks.
7.
Clear blocks in high pressure hose or
replace hose.
8.
Gun leaks.
8.
Replacegun.
9.
Nozzle is obstructed.
9.
Cleannozzle.
10. Pump is faulty.
10. Contact Sears service facility
High pressure nozzle installed.
Replacewith low pressure nozzle.
Engine speed is too slow.
Move throttle control to FAST position, if
engine stiff "bogs down", contact Sears
service facility.
1.
Dirty air cleaner.
1.
Cleanor replace air cleaner.
2.
Out of fuel.
2.
Fill fuel tank.
3.
Stale fuel.
3.
Drain fuel tank; fill with fresh fuel.
Spark plug wire not connected to
spark plug.
4.
Connectwire to spark plug.
5.
Bad spark plug.
5.
Replacesparkplug.
6.
Water in fuel.
6.
Drain fuel tank; fill with fresh fuel.
7.
Excessively rich fuel mixture.
7.
Contact Sears service facility.
Enginewill not start; or starts and 4.
runsrough.
Engine shuts down during
operation.
Out of fuel.
Fill fuel tank.
Engine lackspower.
Dirty air filter.
Replaceair filter.
23