Download Agilent Technologies 8935 Series Specifications

Periodic Adjustments
Periodic Adjustments
Equipment Needed for the System Power Calibration Program
For the System Power Calibration program you will need the
equipment listed in Table 7-2. Because this calibration program is
written specifically for this equipment, no substitutions are possible.
Table 7-2
Equipment List for System Power Calibration Program
Equipment Type
Model
Signal Generator
Agilent 8648B Option 1EA
Power Meter
Agilent 436A
Agilent 437B
Agilent 438A
Agilent EPM-441A
Agilent EPM-442A
Agilent 8901B
Agilent 8902A
Power Sensor
Agilent 8482A
Agilent ECP-E18A
Agilent 11722A
Power Splitter
Agilent 11667A
GPIB Cables
(2 cables required, 3 if GPIB printer is
used.)
Any GPIB cable
Printer (optional)
Any serial, parallel, or GPIB printer
Chapter 7
161