Download Elmo 95VDC Installation guide

Transcript

Solo Whistle Installation Guide
Installation
MAN-SOLWHIIG (Ver. 1.4)
3.5.1
3-7
Connecting Main Power
Power to the Solo Whistle is provided by a 12 to 95 VDC source. A smart control-supply
algorithm enables the Solo Whistle to operate with the power supply only, with no need for an
auxiliary 24 volt supply.
If backup functionality is required (for storing control parameters in case of power-outs) an
additional backup supply can be connected by implementing "diode coupling" to the VL+.
The source of the 12 ~ 95 VDC Main Power Supply must be isolated.
Figure 3-2: Main Power Supply Connection Diagram

Related documents