Download MTU 12 V 4000 C21 Technical data
Transcript
Crankcase Breather 6 – 09 Diaphragm check 1. Remove cover (5). 2. Take off spring (6), seal (4) and diaphragm (3). 3. Check diaphragm (3) for damage. 4. Replace diaphragm if damaged. 5. Mount diaphragm (3) on housing (2). 6. Install new seal (4) and spring (6) together with cover (5). 7. Tighten screws of cover (5) to 6 Nm + 2 Nm. 8. Check diaphragms in further oil separators in the same way. M015560/00E 03-05 © MTU