Download Philips 107E51/99 Technical data

http://jdwxzlw.5d6d.com/?fromuser=华盛维修
OSD Adjustments (Continued)
V20 107E5
9 Go to cover page
Smart Help After returning to MAIN CONTROLS . . .
7) When the trapezoid is adjusted, press the
...to continue to ADJUST SIDE ANGLES, start with step 5 under
ADJUST SIDE ANGLES and follow the directions.
PARALLELOGRAM or press the
SHAPE window.
...to exit completely, press the
button twice.
9
button to highlight
button to return to the ADJUST
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above,
then press the button, and follow steps 7 - 9.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust
two of the five preset options. These two options are TRAPEZOID and
PARALLELOGRAM. Note: use these features only when the picture is
not square.
1) Press the
appears.
2) Press the
button on the monitor. The MAIN CONTROLS window
button until ADJUST SHAPE is highlighted.
8) To adjust the parallelogram, press the
or
button.
9) When the parallelogram is adjusted, press the
button to return to
the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be
highlighted.
10) Press the
button to return to the MAIN CONTROLS window, or
press the button until ROTATE IMAGE is highlighted.
Smart Help After returning to MAIN CONTROLS . . .
...to continue to ROTATE IMAGE, start with step 5 under ROTATE
IMAGE and follow the directions.
...to exit completely, press the
button twice.
...to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then
press the
button, and follow steps 7 -9
ROTATE IMAGE
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of
the five preset options. These two options are PINCUSHION and
BALANCED pincushion. Note: use this feature only when the picture is
not square.
3) Press the
button. The ADJUST SHAPE window appears.
ADJUST SIDE CURVE should be highlighted.
4) Press the
1) Press the
appears.
2) Press the
button on the monitor. The MAIN CONTROLS window
button until ADJUST SHAPE is highlighted.
button to highlight ADJUST SIDE ANGLES.
5) Press the
button. The SIDE ANGLES window appears.
TRAPEZOID should be highlighted.
3) Press the
button. The ADJUST SHAPE window appears.
ADJUST SIDE CURVE should be highlighted.
4) Press the
6) To adjust the trapezoid, press the
or
arrow until ROTATE IMAGE is highlighted.
button.
家电维修资料网，免费下载各种维修资料