Download ARM Cortex-M3 User guide
Transcript
Debug SCS CoreSight identification Table 7-3 shows the SCS CoreSight identification registers and values for debugger detection. Final debugger identification of the Cortex-M3 processor is through the CPUID register in the SCS. See CPUID Base Register, CPUID on page 4-5. Table 7-3 SCS identification values Address Register Value Description 0xE000EFD0 Peripheral ID4 0x00000004 0xE000EFE0 Peripheral ID0 0x00000000 Component and Peripheral ID register formats in the ARMv7-M Architectural Reference Manual. 0xE000EFE4 Peripheral ID1 0x000000B0 0xE000EFE8 Peripheral ID2 0x0000000B 0xE000EFEC Peripheral ID3 0x00000000 0xE000EFF0 Component ID0 0x0000000D 0xE000EFF4 Component ID1 0x000000E0 0xE000EFF8 Component ID2 0x00000005 0xE000EFFC Component ID3 0x000000B1 See the ARMv7-M Architectural Reference Manual and the ARM CoreSight Components Technical Reference Manual for more information about the SCS CoreSight identification registers, and their addresses and access types. 7.1.3 Debug register summary Table 7-4 shows the debug registers. Each of these registers is 32 bits wide and is described in the ARMv7-M Architectural Reference Manual. Table 7-4 Debug registers Address Name Type Reset Description 0xE000ED30 DFSR RW 0x00000000a Debug Fault Status Register 0xE000EDF0 DHCSR RW 0x00000000 Debug Halting Control and Status Register 0xE000EDF4 DCRSR WO - Debug Core Register Selector Register 0xE000EDF8 DCRDR RW - Debug Core Register Data Register 0xE000EDFC DEMCR RW 0x00000000 Debug Exception and Monitor Control Register a. Power-on reset only Core debug is an optional component. If core debug is removed then halt mode debugging is not supported, and there is no halt, stepping, or register transfer functionality. Debug monitor mode is still supported. ARM DDI 0337I ID072410 Copyright © 2005-2008, 2010 ARM Limited. All rights reserved. Non-Confidential 7-5