Download Compaq ProLiant Specifications
Transcript
2-28 Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide Expansion Board Guide To remove the expansion board guide: 1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the front bezel. See “Front Bezel” earlier in this chapter. 3. Remove the access panel. See “Access Panel” earlier in this chapter. 4. Remove all expansion boards supported by the board guide. 5. Push in the four locking tabs chassis . , and then pull the guide back and away from the 1 1 1 2 1 Figure 2-25. Removing the expansion board guide To replace the expansion board guide, reverse steps 2 through 5.