Download DCS DD24DUT7 User guide

14 THERE ARE THREE DIFFERENT DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
If space is limited
for fixing, push
hose through drain
hose support
to required height
Dishwasher using Air Break with Drain Hose Joiner
If space is limited
for fixing, push
hose through drain
hose support to
required height
2
Supplied drain hose joiner
Ø ¾” (19 mm) waste tee
750-882.5
29 ½”-34 ¾”mm
(750-882.5 mm)
2
max.
max.
4¾”
120
(120mm)
mm
Dishwasher using sink trap with drain hose joiner
3
2
29
½”-34 ¾”mm
750-882.5
(750-882.5 mm)
Dishwasher and Standpipe Ø 1½” (38 mm)
16
1
37 3⁄8”
(950 mm)
Max.
height
to top of
Air Break
see 15**
min. R 8”
(200 mm)
1
see 15*
min. R 8”
(200 mm)
15 CONNECT INLET HOSE TO* HOT WATER
16 SWITCH PRODUCT ON
29½”-34¾” (750-882.5 mm)
29½”-34¾” (750-882.5 mm)
1½”mm
38
(38 mm)
1
HIGHLOOP
min. 6”
(150 mm)
see 15*
min. R 8”
(200 mm)
Ensure drain hose is routed straight
to joiner. Remove excess drain hose
material if necessary.
Do not shorten the inlet hose.
Tighten coupling with wrench.
Ensure the
supplied
rubber
washer is
fitted inside
the coupling.
Important!
180o
No leaks!
13
24
Ensure that drain connection
will comply with local plumbing
regulations.