Download Epson TM-J2000 Specifications
Transcript
For the TM-H6000, TM-H6000II Bit Function 0 Reading font 1 Reserved 2 Reserved 3 Detailed information 4 Reread 5 Reading results 6 Reading data overflow 7 Fixed For the TM-H5000II, TM-U675 Bit Function Value 0 E13B 1 CMC7 Fixed at 0 Fixed at 0 Not added Enabled Normal end No Added Disabled Abnormal end Yes Fixed at 0 Value 0 0 1,2,3 4 5 6 7 Reading font Reserved Reread Reading results Reading data overflow Fixed 1 E13B CMC7 Fixed at 0 Enabled Normal end No Disabled Abnormal end Yes Fixed at 0 For the TM-J7000/7100 Bit Function Value 0 0 1,2 3 4 5 6 7 Reading font Reserved Detailed Information Reread Reading results Fixed Fixed 1 E13B CMC7 Fixed at 0 Not added Enabled Normal end Added Disabled Abnormal end Fixed at 1 Fixed at 0 MICR Detailed Information For the TM-H6000, TM-H6000II, TM-J7000/7100 Value Information 40h No abnormality 41h Check reading was not executed even once. (The BiMICRREADCheckfunction has not been called.) 42h Check insertion wait was canceled. (The BiMICRCancelWaitCheckInsertionfunction was called.) 43h Check insertion wait was canceled by the set time being exceeded. (The time out set time passed while the BiMICRReadCheckfunction was being called.) 44h A check with a non-standard length was inserted. 45h The magnetic waveform was not detected. 46h Characters which could not be analyzed were detected in analysis processing. 47h An error occurred during check reading processing. 48h An error was detected in the noise measurement. 49h Check reading processing was interrupted by the cover being opened. [Caution] EPSON TITLE EPSON Advanced Printer Driver for TM series StatusAPI Reference Manual Revision No L NEXT SHEET 39 38