Download Compaq 6830s - Notebook PC Specifications
Transcript
3. Remove the three Phillips 2.0-mm broad-head screws from the optical drive bay (1), and remove the Torx 4.0-mm screw from the hard drive bay (2). 4. Turn the computer right-side up. 5. Remove the three slotted Torx 7.0-mm screws from the top cover. 6. Lift the rear edge of the top cover (1) until it disengages from the base enclosure. Then tilt the top cover back (2) until the TouchPad cable is accessible. Component replacement procedures 61