Download Baumatic REFLEX User manual
Transcript
o Leave the door ajar slightly to prevent an unpleasant odour from developing. o Clean all of the filters and dry the inside of the machine thoroughly. Reconnecting the appliance after a period of disuse If the appliance has not been used for a prolonged period of time, then before using the appliance again, we would recommend that you do the following:o Check that no sludge or rust has built up in the pipes. If this has happened, let water run through the tap for a few minutes. o Reconnect the inlet hose and outlet hose, making sure that the water tap is open. o Reconnect the appliance to your mains supply. Installation Installation of this appliance must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Regulations and Safety Standards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment). o Building Standards (issued by the Scottish Development Department). o IEE Wiring Regulations. o Electricity At Work Regulations. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. IMPORTANT: THIS INSTALLATION MUST BE COMPLETED BY A SUITABLY QUALIFIED PERSON. BAUMATIC ONLY SANCTION THE INSTALLATION GIVEN IN THIS INSTRUCTION MANUAL. YOU SHOULD DISPOSE OF ALL PACKAGING IN AN ENVIRONMENTALLY FRIENDLY MANNER. 28