Download Baumatic REFLEX User manual

Transcript
o If you are not going to use the plug that is fitted to the power
cable, then the dishwasher should be wired into a 3A double pole
switched fused spur outlet, having 3 mm contact separation and
placed in an easily accessible position adjacent to the appliance.
The spur outlet must still be accessible even when your
dishwasher is located in its housing.
o Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
IMPORTANT: We do not recommend that this appliance is connected
to an extension lead.
Before first use
You should check the following before using the appliance for the first
time:That the dishwasher is level and fixed in position.
That the water tap is fully open.
That there are no leaks at either end of the drain or inlet hoses.
That the inlet and drain hoses are fully tightened.
That the inlet and drain hoses are not kinked.
That the power is switched on.
That the water softener has been filled with 1 litre of water and
filled with dishwasher salt.
o That the rinse aid dispenser has been filled.
o
o
o
o
o
o
o
37