Download Channel Plus 8051 Specifications

Transcript
Figure 25-7. Serial Programming Power-up Sequence
VDD
tPWRUP
RST
tPOR + tSUT
SS
tZSS
SCK
25.9.2
MISO
HIGH Z
MOSI
HIGH Z
Power-down Sequence
Execute this sequence to power-down the device after programming.
1. Drive SCK low.
2. Wait at least tSSD and bring SS high.
3. Tristate MOSI.
4. Wait at least tSSZ and then tristate SS and SCK.
5. Wait no more than tPWRDN and power off VDD.
Figure 25-8. Serial Programming Power-down Sequence
VDD
tPWRDN
RST
SS
SCK
25.9.3
tSSD
tSSZ
MISO
HIGH Z
MOSI
HIGH Z
ISP Start Sequence
Execute this sequence to exit CPU execution mode and enter ISP mode when the device has
passed Power-On Reset and is already operational.
1. Drive RST low.
2. Drive SS high.
3. Wait tRLZ + tSTL.
4. Start programming session.
166
AT89LP3240/6440
3706C–MICRO–2/11