Download Zero 80ZC Operating instructions

CONTINUED FRAMING AND INSTALLATION
INSTALLING TOP AND SIDE PANELS TO 80ZC
1. Remove the 80ZC from box and pallet. Lay brass louvers, insulation cap and front side screens to
side for use later.
2. Take Left Side Panel and place front of Left Side Panel against back of left front side, with the
(2) two screws provided fasten Left Side Panel to Cabinet. Repeat process for right side.(See Figure 6)
3. Place top panel over and in front of side panels just installed. Fasten top panel ends to the side panels
with the (2) two screws provided (See Figure 7).
REAR OF LEFT
FRONT SIDE
FIGURE 6
BACK OF FRONT
LEFT SIDE PANEL
SCREWS
FRONT OF LEFT
OUT SIDE PANEL
TOP OUT SIDE PANEL
FIGURE 7
FRONT 80ZC BOX
FRONT OF LEFT
OUT SIDE PANEL
Page 9
SCREWS