Download Advantech MIC-3369C Installation guide

---0-------0010
4: 1-------0010000
Hex Dump:
02 01 e6 ce 08
02 82 90
Enqueue Failed
Spare
Location
Extension Bit
Cause Value
02 1e 2a 45 08
In order to avoid loss of trace information and provide more robust performance of the
ISDNtrace tool, the -s command line option should be specified to disable trace output
to STDOUT whenever the capture of trace information for a large amount of calls is
being performed, or “enqueue fail” failures occur.
1.23.2
Supported Boards
The following boards support this feature:
• Dialogic® DM3 Boards with network interface
1.23.3
Documentation
The online bookshelf provided with Dialogic® System Release 6.1 CompactPCI for
Windows® contains information about all system release features including features for
application development, configuration, administration, and diagnostics.
For more information about the ISDNtrace tool, see the Dialogic® System Software
Diagnostics Guide.
1.24
New Media Loads for Dialogic® DM/V2400A-cPCI
and DM/V4800BC Media Boards
The Service Update provides new media loads for the Dialogic® DM/V2400A-cPCI and
DM/V4800BC Media Boards. These new media loads support a combination of voice with
conferencing and/or fax.
Media load 9F, for the DM/V2400A-cPCI and DM/V4800BC Boards, supports rich
conferencing (conferencing, echo cancellation, and tone clamping) and fax. Media load
9F-MC, for the DM/V4800BC Board only, provides a similar set of features and also
allows a larger conference size (with fewer conferences). Media load 10F, for the
DM/V4800BC Board only, is a high density basic voice and rich conferencing media load.
1.24.1
Feature Description
Predefined sets of features for Dialogic® DM3 Boards are provided in media loads. A
media load consists of a configuration file set (PCD, FCD, and CONFIG files) and the
associated firmware that is downloaded to the board. See the Dialogic® DM3 Architecture
Dialogic® System Release 6.1 CompactPCI for Windows® Release Update
70