Download Siemens SICLOCK TC 400 Operating instructions

Parameter Table
Table 10-1
Access1)
/ No.
List of the parameters of SICLOCK TC400
Parameter
Entry
Network Adapter 2
hardware address
0.05.06
Line State Adapter 2
link
0.09.14
linespeed
duplex
Advanced Settings
Adapter 2
monitor link state
0.05.10
Value Range / Default
Min:
00.00.00.00.00.00
Max:
FF.FF.FF.FF.FF.FF
Default:
00.00.00.00.00.00
Min:
---
Max:
down
Default:
---
Min:
---
Max:
100 Mb/s
Default:
---
Min:
---
Max:
half duplex
Default:
---
Min:
off
Max:
alarm
Default:
off
Min:
0.0.0.0
Max:
255.255.255.255
Default:
192.168.3.30
Min:
0.0.0.0
Max:
255.255.255.255
Default:
255.255.255.0
Min:
0.0.0.0
Max:
255.255.255.255
Default:
0.0.0.0
Min:
00.00.00.00.00.00
Max:
FF.FF.FF.FF.FF.FF
Default:
00.00.00.00.00.00
Min:
---
Max:
down
Default:
---
Min:
---
Max:
100 Mb/s
Default:
---
Min:
---
Max:
half duplex
Default:
---
Network Settings/Ethernet 3
Note: The TC400's four Ethernet ports must be on different subnets.
IP Adapter 3
IP address
0.05.03
subnet mask
gateway
Network Adapter 3
hardware address
0.05.07
Line State Adapter 3
link
0.09.15
linespeed
duplex
Advanced Settings
Adapter 3
0.05.11
10-96
monitor link state
Min:
off
Max:
alarm
Default:
off
© Siemens AG 2007 All Rights Reserved
SICLOCK® TC400