1
Download Magellan ProMark3 RTK Specifications
Transcript
As an illustration, consider an example where two new intervisible points are to be established on a project site for use as control for a boundary survey. The two new points need to be tied to an existing control point 3 kilometers (1.9 miles) away. Three-Point Control Survey Example If you were to perform this survey with a conventional total station, you would probably plan on running a closed-loop traverse from the existing control point through the two new points (see figure below). The same philosophy can be used for GPS surveys. The figure below is your network design for this survey Closed-Loop Traverse Design 75
