Download Show Designer 3 Manual

TURN OFF SCENE
You can turn off a scene by pressing its lit LED to toggle it off. Any channels that are included in the scene
will return to 0.
ERASE SCENE
To erase a scene from the memory, press “record” then “scene” then “erase”. As when recording a scene,
all number LEDs that contain a scene will light. Next select the scene number to erase. That scene name
will appear in the LCD along with the message “Erase this scene?”. Press “yes” or “no”. If you press “yes”
the scene will be erased. You can then select additional scenes to be erased or you can press “record” to
exit record mode.
17