Download Asus ASMB6-IKVM User guide
Transcript
5. Carefully cut the cable tie on the SATA/SAS cables and SGPIO cables. 6. Connect the SGPIO cable to the SGPIO1 connector into the SGPIO2 connector on the PIKE riser card. 7. Remove the SATA/SAS cables from the onboard SATA1, SATA2, ISAS1, ISAS2, ISAS3 and ISAS4 connectors. 8. The SATA/SAS cables are tied and labeled in four groups. Group 1 connects to HDD 1 and 2, Group 2 to HDD 3 and 4, Group 3 to HDD 5 and 6, and Group 4 to HDD 7 and 8. ASUS ESC4000 G2 Series 2-23