Download Cobra CWA BTH1 Plus User manual

Transcript
CWA BTH8
User Manual
©2011 Cobra Electronics Corporation
Part No. 480-726-P
Printed in China Version B
WARRANTY SERVICE:
All defective units within the warranty periods will be repaired or replaced.
WARRANTY DOES NOT APPLY TO:
1. Damage resulting from use of the unit in other than it’s normal and intended manner.
2. Damage from misuse, accident, neglect, improper testing, installation, alteration, modification of any kind,
and/or spillage of food or liquid.
3. Damage caused by natural disaster and/or the capacity of expendibles is exhausted.
Bluetooth® Wireless Technology...................................................................................................... 1
How To Use Your Headset................................................................................................................. 1
Product Features............................................................................................................................... 1
Product Description.......................................................................................................................... 2
Product Overview.............................................................................................................................. 2
Charging the Headset..................................................................................................................... 2
Products name
Cobra CWA BTH 8 Hands Free Headset
Turning the Headset On or Off......................................................................................................... 3
Model number
CWA BTH 8
Pairing the headset with Your Phone.............................................................................................. 3
Answering a Call............................................................................................................................... 3
Purchased date
Ending a call..................................................................................................................................... 4
Place of purchas e
Voice Dialing..................................................................................................................................... 4
Customer Name
Problems with the Headset Disconnecting.................................................................................... 4
Customer Addr ess
Volume Control................................................................................................................................. 4
Telephone #
Warranty period
Proper Disposal................................................................................................................................. 4
1 year
FCC Information................................................................................................................................ 5
Trademark Information.................................................................................................................... 7
BLUETOOTH® WIRELESS TECHNOLOGY
Bluetooth wireless technology propels you into a new domain in wireless connectivity.
Now you can communicate without wires, using built in radio transceivers that operate
on a globally available radio frequency to ensure worldwide compatibility. Your Cobra
CWA BTH8 headset can connect with other Bluetooth wireless technology enabled
devices with in a 32 foot range.
HOW TO USE YOUR HEADSET
Your wireless headset can be paired with any other Bluetooth wireless technology
equipped devices.
• Use with your cellular phone.
• Handle incoming and outgoing calls with the one touch
multi-function button.
• Use voice dialing to make calls if supported by your phone.
THANK YOU!
Thank you for purchasing the Cobra CWA BTH8 hands-free headset. Please read
this entire user guide to get started and to make the best use of your headset’s many
features. When you are driving a car, driving is your first responsibility. Please follow
local regulations.
PRODUCT FEATURES:
• 20 Hours Talk Time
• 400 Hours Standby Time
• Lightweight
• T5 Sonance Noise Cancellation Technology
CHARGING ACCESSORIES:
• USB Charging Cable
• 12V CLP Vehicle Charger
Microphone
PRODUCT OVERVIEW
* This headset is designed for an active lifestyle, combining stylish design and
reliable wireless technology into the ideal lightweight over the head style headset.
* This headset can be paired to any Bluetooth wireless technology enabled device
such as a computer, gaming unit, PDA, cellphone, and more.
* This headset meets the requirements for hands-free laws.
CHARGING THE HEADSET
The Cobra CWA BTH 8 uses a rechargeable internal battery. You must charge the
battery fully before using the headset for the first time.
1.Plug the USB charging cable into the headset.
2.Plug the USB charging cable into a USB port on a PC or insert the USB cable into the cigarette charging adapter and place into a working cigarette lighter outlet.
The indicator light will illuminate red while charging.
3.A full charge will take approximately 2-4 hours. The red indicator light will turn off once fully charged.
NOTE: Your headset is powered by a non-removable rechargeable Lithium Polymer
internal battery. The full performance of a new battery is achieved only after 2-3
complete charging and discharging cycles. This battery can be charged and uncharged
hundreds of times, but will eventually wear out. Do not use the headset while charging.
Volume Increase
BATTERY:
Rechargeable lithium
polymer battery
BLUETOOTH VERSION:
v2.0
PRODUCT DESCRIPTION
The Cobra CWA BTH8 is a Bluetooth wireless technology enabled ultra lightweight
headset featuring a boom microphone and extra long talk and standby times.
The Cobra CWA BTH8 also features T5 Sonance Noise Cancellation Technology
allowing you to have a crystal clear conversation even in the nosiest of environments.
Do not leave a fully charged battery connected to the charger, as it may shorten the
battery life. If left unused for over twenty days, a fully charged battery will slowly begin
to lose it’s charge.
Indicator Light
Multi-Function
Button
Mini USB Jack
Volume Decrease
1.
2.
TURNING THE HEADSET ON OR OFF
To turn the headset on, press and hold the multi-function button for 3 seconds. The
indicator light will illuminate blue and flash every 10 seconds.
To turn the headset off, press and hold the multi-function button for 7 seconds, the
indicator light will flash red 3 times and shut down.
VOICE DIALING
Voice dialing is available, if your phone supports this feature.
1.Connect the headset and turn on the phone’s voice recognition software.
2.Press the multi-function button once on the headset.
3.Following the beep prompt, say the name of the person you wish to call.
PAIRING THE HEADSET WITH YOUR PHONE
The distance between your phone and your headset during the pairing should be
about 3 feet.
1.Ensure that the headset is fully charged and turned on.
2.Press and hold the multi-function button until you see the indicator light flash
red AND blue.
3.Activate the Bluetooth on your phone. Set your phone to search or discover the
headset by following the instructions in your phone’s user guide.
4.Your phone will find the “CBTH8” headset and ask you if you want to pair with it,
select yes or ok.
5.When prompted, enter password 0000 and then press enter, yes or ok.
PROBLEMS WITH HEADSET DISCONNECTING
* Ensure that the headset is fully charged, is turned on, and has been successfully
paired to your mobile device.
* Ensure the Bluetooth wireless technology function is enabled on your device.
* Be sure the headset and enabled device are within 32 feet (10 meters) of each other,
with no interference.
IMPORTANT: If the pairing process was successful, the indicator light will flash blue
3 times, and then it will flash blue once every 7 seconds.
IMPORTANT:
Not all functions or operations stated in this user manual will work with all phones.
Functions and operations are subject to individual mobile phone and carriers.
Please read your phone’s instructions guide as operation and step sequences
may be different.
If your are unsuccessful, the red and blue LED will continue to alternate blue and
red. If pairing is unsuccessful, turn off your headset and repeat steps 1-5 as well as
referencing your phone’s user manual. To turn off the headset, press and hold the multifunction button for about 7 seconds.
The pairing mode of the headset generally lasts for about 60 seconds.
ANSWERING A CALL
When a call comes in, you will hear a ringtone in the headset. Press the multi-function
button once or use your phone’s keypad.
ENDING A CALL
To end a call, press the multi-function button once or use your phone’s keypad.
3.
VOLUME CONTROL
Press and hold the + to increase the volume.
Press and hold the - to decrease the volume.
You’ll hear a beep from the headset when the volume is at the maximum or minimum.
PROPER DISPOSAL
This product should not be disposed of with other household wastes at the end of
its’ working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of waste and recycle
it responsibly to promote sustainable reuse of material resources.
This headset contains a lithium polymer battery.
Headset user should contact either the retailer where they purchased the headset or their
local government office for detail of where and how to dispose or recycle.
4.
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Declaration of Conformity
FCC (FCC ID: WSGSK-BH-M12)
CWA BTH8 is FCC certificated as this device complies with part 15 of the FCC rules.
European CE 0678:
CWA BTH8 has been manufactured in accordance with the European R& TTE directive.
It complies with the European Low Voltage Directive 73/23/EEC and the European EMC
Directive 89/336/EEC.- Reorient or relocate the receiving antenna.
BQB Qualification:
Bluetooth Qualified Design ID: (QDID) B014585.
CWA BTH8 Bluetooth® Wireless Headset, a BQB Qualified Bluetooth® wireless technology
product is listed as qualified End Product in accordance to section 6.2.4 of the PRD.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
5.
6.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. Other trademarks and trade names are those of their respective owners.
Cobra Electronics Corporation Cobra, Nothing Comes Close to a Cobra and the snake
design are registered trademarks of Cobra Electronics Corporation, USA.
Cobra Electronics Corporation is a trademark of Cobra Electronics Corporation, USA.
©2011 Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707
www.cobra.com
MADE IN CHINA
7.
8.