Download Altera DE2-115 User guide

Using the System
Table 3.2 Pin Assignment for Audio CODEC
Using the LEDs and Switches
3-6
The DE2 Board provides 4 push buttons. All of the buttons are Schmitt Trigger
de-bounced. When a push button is pressed, only one zero pulse will be generated.
There are also 18 toggle switches on the DE2 boards for users to set HIGH/LOW to
the 18 GPIOs of the CycloneII FPGA. The DE2 Board has 9 green user LEDs and 18
red user LEDs. Figure 3.8 shows the related schematics. The pin assignments of the
push buttons, DPDT switches, and LEDs are listed in Table 3.3, 3.4, and 3.5,
respectively.
18