Download DR RAPIDFIRE Operating instructions

Troubleshooting Table (Continued)
Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.
Disconnect the spark plug wire, keeping it away from the spark plug.
SYMPTOM
POSSIBLE CAUSE
Machine does not seem
to have full splitting
power.
 The belts may be too loose and slipping. Adjust or replace belts as needed.
Operator Lever not
engaging rack with
pinion gear.
 Clean wood chips or other debris from under rack.
 Clean accumulated dirt from frame where carriage assembly rests against rubber bumpers.
CONTACT US AT www.DRpower.com
21