Download Appro SD-7800 Specifications
Transcript
7700/7800 MultiFrame Manual 7700ACO2-HD Dual HD/SD-SDI Smart Automatic Changeover 5.7. SWITCHER NODE MENU LOV1 Path 1 Loss of Video Mode Sets the output mode when video is lost on Path 1. LOV2 Path 2 Loss of Video Mode Sets the output mode when video is lost on Path 2. GPI1 Path 1 GPI Control Enables or Disables GPI Control on Path 1. GPI2 Path 2 GPI Control Enables or Disables GPI Control on Path 2. LNS1 Path 1 Line Sync Enable Enables or Disables the Line Synchronizer on Path 1. LNS2 Path 2 Line Sync Enable Enables or Disables the Line Synchronizer on Path 2. GSRC Module Genlock Source Controls the Genlock Source for the Module. FCO1 Path 1 Fault Collection Sets the Fault Collection state for Path 1. FCO2 Path 2 Fault Collection Sets the Fault Collection state for Path 2. Table 5-8: Video Switcher Node Menu Structure 5.7.1. Loss of Video Mode LOV1/LOV2 BLCK BLUE This parameter sets the output mode when a source with no video is routed to the output. BLCK – Output video will be black. BLUE – Output video will be blue. Revision 1.0 Page - 27