Download Cisco SPA303 User guide
Transcript
3 Using Advanced Phone Features Changing the System Time Settings Changing the System Time Settings In most cases, the Unified Communications system time settings are controlled by a network time server. However, if the Unified Communications system is not connected to the Internet or if the time server is not reachable, you can set the system clock from any Cisco IP phone in the system. Be aware that this manual setting will be lost if the Unified Communications system loses power. Not available on Cisco SPA301 and Cisco SPA501G Task Instructions Cisco SPA303 and Cisco 1. Press . SPA50x Series IP phones (except Cisco SPA501G) 2. Select Time/Date. 3. Enter the Date in the mm/dd/yy format. Press * or # for the forward slash. For example, enter 10*01*11 for Oct. 10, 2011. 4. Press the down-arrow navigation button, and then enter the Time in hh:mm:ss format. Press * or # for the colon. For example, enter 6*21 for 6:21. 5. Press the down-arrow navigation button, and then enter the time zone Offset in ±H:m:s format. Press * for + or # for -. Press * or # for the colon. For example, for the U.S. Pacific Time zone, enter *8*00 for -8:00. 6. Press Save . 7. Press to close the window. The time setting is propagated to the UC320W and the other phones. Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 89