Download Directed Electronics 200 Installation guide

what is included
■
■
■
■
■
■
■
■
■
The control module (see diagram)
Two 470T Series remote transmitters
Primary harness
A plug-in status LED
A plug-in Valet® switch
An on-board shock sensor
A back-up battery siren
Two back-up battery siren keys
A mercury tilt switch (for motorcycle installations)
Shock Sensor
Sensitivity
Adjustment
Antenna
White
LED Port
(2-Pin Connector)
H1 Primary
Harness Port
(14-Pin Connector)
© 2001 Directed Electronics, Inc. Vista, CA
Blue Valet
Switch Port
(2-Pin Connector)
3