Download Brainboxes PX-246 Specifications
Transcript
Specification 3.11 APPLICABLE STANDARDS BS 4884-1 BS 4884-2 BS 4884-3 BS EN 60068-2-1 (Minimum temperature) BS EN 60068-2-2 (Maximum temperature) BS EN 60950 BS EN 61000-6-2 BS EN 61000-6-4 BS EN 60529 (Degrees of protection provided by enclosures) UL508 NEMA rating (Approximate) IEEE C37.2 (Standard Electrical Power System Device Function Numbers and Contact Designations) This document conforms to BS4884-1 1992 Specification for presentation of essential information. This document conforms to BS4884-2 1993 Guide to content This document conforms to BS4884-3 1993 Guide to presentation -30°C (-22°F) +70°C (158°F) Safety of information technology equipment, including electrical business equipment EMC Generic Immunity Standard (Industrial) EMC Generic Emission Standard (Industrial) IP65 (front of module when installed into the control panel with the supplied sealing gasket) IP42 (front of module when installed into the control panel WITHOUT being sealed to the panel) 12 (Front of module when installed into the control panel with the supplied sealing gasket). 2 (Front of module when installed into the control panel WITHOUT being sealed to the panel) Under the scope of IEEE 37.2, function numbers can also be used to represent functions in microprocessor devices and software programs. The controller is device number 11L-8000 (Multifunction device protecting Line (generator) –module). As the module is configurable by the OEM, the functions covered by the module will vary. Under the module’s factory configuration, the device numbers included within the module are : 2 – Time delay starting or closing relay 3 – Checking or interlocking relay 8 – Control power disconnecting device 11 – Multifunction device 23 – Temperature control device (USING EXPANTION MODULE) 26 – Apparatus thermal device (USING EXPANTION MODULE) 27AC – AC undervoltage relay 27DC – DC undervoltage relay 29 – Isolating contactor or switch 30 – Annunciator relay 37 – Undercurrent or underpower relay (USING INTERNAL PLC EDITOR) 42 – Running circuit breaker 44 – Unit sequence relay 48 – Incomplete sequence relay 49 – Machine or transformer thermal relay (USING EXPANTION MODULE) Continued overleaf. 21