Download Bard WH421 Specifications

FAN BLADE SETTING DIMENSIONS
REFRIGERANT CHARGE
Shown in the drawing in Figure 11 are the correct fan
blade setting dimensions for proper air delivery across
the outdoor coil.
The correct system R-22 charge is shown on the unit
rating plate. Optimum unit performance will occur with
a refrigerant charge resulting in a suction line
temperature (6 inches from compressor) as shown in the
Table 7.
TABLE 7
SUCTION LINE TEMPERATURES
Any service work requiring removal or adjustment in
the fan and/or motor area will require that the
dimensions below be checked and blade adjusted in or
out on the motor shaft accordingly.
FIGURE 11
FAN BLADE SETTING
TABLE 6
FAN BLADE DIMENSIONS
Model
Dimension A
WH421
WH483
WH602
1.75
Model
Rated
Airflow
95°F O.D.
Temperature
82°F O.D.
Temperature
WH421
WH483
WH602
1400
1550
1700
52 -- 54
53 -- 55
52 -- 54
62 -- 64
62 -- 64
61 -- 63
The suction line temperatures in Table 7 are based upon
80ºF dry bulb/67 degrees F wet bulb (50 percent R.H.)
temperature and rated airflow across the evaporator
during cooling cycle.
TABLE 8
RECOMMENDED OPERATING RANGES
MIS-1190
REMOVAL OF FAN SHROUD
Model
Rated
C FM *
Rated
ESP *
Recommended
Air Flow Range
1. Disconnect all power to unit.
WH421
1400
.30
1600 -- 1150
2. Remove the screws holding both grilles – one on
each side of unit – and remove grilles.
WH483
1550
.20
1750 -- 1285
WH602
1700
.30
1950 -- 1375
3. Remove screws holding fan shroud to condenser and
bottom – (9) screws.
* Rated CFM and ESP on high speed tap.
4. Unwire condenser fan motor.
5. Slide complete motor, fan blade, and shroud
assembly out the left side of the unit.
6. Service motor/fan as needed.
7. Reverse steps to reinstall.
TABLE 9
INDOOR BLOWER PERFORMANCE
CFM @ 230V
WH421, WH483
WH602
L o w 230V
High 230V
L o w 230V
High 230V
E.S.P.
In H2O Dry Coil Wet Coil Dry Coil Wet Coil Dry Coil Wet Coil Dry Coil Wet Coil
.0
.1
.2
.3
1650
1550
1450
1350
1600
1500
1400
1300
1885
1770
1635
1500
1800
1665
1540
1400
.4
.5
1300
-----
1175
-----
1370
1250
1285
1150
1600
1525
1450
1375
2200
2100
2000
1875
2000
1900
1800
1700
1775
1650
1600
1475
Manual 2100-399
Page 19