Download PSC Scanners Specifications
Transcript
IBM 4683/84 • 4693/94 Port 5B Interface Selection IBM 4683/84 • 4693/94 Port 5B Settings Data Format: Send As Code 39 — converts bar code data (UPC/EAN, addons, Code 93, Codabar, MSI/Plessey and Code 128) into Code 39 format before sending the data to the host. These settings are for IBM 4683/84 • 4693/94 Port 5B interface ONLY. Limit Command Set — is an option that causes the scanner to ignore 'enable scanner' and 'disable scanner' commands sent from the host. Transmit Unsolicited Status1 — when enabled, this option causes the scanner to transmit a status message to the host upon receipt of an "SNRM". SET --------------------------------------------------------------- SEND DATA FORMAT DON'T SEND AS AS CODE 39 CODE 39 ------------------------------ ENABLE LIMIT COMMAND SET DISABLE LIMIT COMMAND SET -------------------------- TRANSMIT UNSOLICITED STATUS DON'T TRANSMIT UNSOLICITED STATUS -------------------------------------------------------- END 1 For this IBM interface, the setting for Unsolicited Status is normally Enabled. R44-2018 9 IBM INTERFACES Scan this single label to enable the IBM 468x Port 5B interface (do not scan the SET bar code before, or the END bar code after scanning the interface selection bar code).