Download HP Pavilion 403 System information

3.
Remove the display assembly (2).
NOTE: Steps 4 through 17 provide component removal information for computer models
equipped with a flush glass display assembly. See steps 18 through 29 for component removal
information for computer models equipped with a standard display assembly.
4.
If it is necessary to replace the display enclosure or any of the display assembly internal
components, remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The rubber screw covers are
included in the Display Rubber Kit, spare part number 605341-001.
(2) Two Phillips PM2.5×7.0 screws.
Component replacement procedures
75