Download Universal Laser Systems X-600 Specifications

MELAMINE - STANDARD ENGRAVING
TYPE
RASTER ENGRAVING
POWER
100
SPEED
70
PPI
500
PASS
1
DEPTH
.015”
SPEED
50
PPI
500
PASS
1
DEPTH
.020”
SPEED
4.0
PPI
500
PASS
1
DEPTH
.010”
COMMENTS: Engrave unmasked.
TYPE
DEEP RASTER ENGRAVING
POWER
100
COMMENTS: Engrave unmasked.
TYPE
VECTOR ENGRAVING
POWER
20
COMMENTS: Engrave unmasked.
ADDITIONAL COMMENTS
Engraving melamine is very similar to engraving regular wood with the added benefit of
a consistent surface finish and uniform base material composition. Unlike regular wood
which has grain patterns and density variations, melamine when laser engraved
produces a flat and even engraved area. This characteristic gives this material superior
engraving and paint filling qualities. Masking can be used if desired but it is just as easy
to spray the engraved area with water and wipe down with a chamois cloth to remove
the smoke residue. Since the top surface material is consistent in texture and color,
engraving photographs or highly detailed images produces exceptional results. Refer to
the next example on engraving photographs and/or ClipArt.
75