Download California Air Tools 15020C Operating instructions

Fit armature disc.
Fit friction plate with lip seal.
i
NOTE
Ensure correct fit of lip seal. The cable
duct must lie in the recess of the lip seal.
40991444.eps
40991244.eps
Seal
40990744.eps
Fit brake casing.
Keep cables pulled tight during assembly.
Then remove assembly guide.
Cable duct
i
NOTE
Seal in brake enclosure must always be
in contact with the cable duct.
Use two 6 mm dia. bolts or pins (as assembly
aid) to guide the brake spring.
40991544.eps
40990844.eps
© Demag Cranes & Components GmbH
1
Tighten the 4 nuts with a tightening torque of
3 Nm and fit plugs (1).
Loose connections are a danger to life
and limb.
Apply the tightening torques specified in the
following.
Tightening torque of motor nuts 3 Nm
92
41107544.eps
42589144.eps
42589244.eps
21115144_en_310310
CAUTION
Danger by loose connections