Download Sharp VC-488NS Technical data

Chapter 2 - Installation
Figure 2-7: Connecting the TNC to N-type Adaptor
Connecting the Grounding Cable
Connect the other side of the grounding cable to a grounding source of
the rack.
NOTE
A good ground system is required for proper installation and operation. The lightning
arrestor is only as good at suppressing impulses as the electrical ground system that is
connected to the unit.
Connecting the “Equipment” side
Connect the 1 meter RF TNC-type side (cable from the kit) to the
Protector device – to the “Equipment” side (if the lightning arrestor has
N-type connectors use the N-type to TNC adaptor).
GPS Timing Receiver Installation and Operation Manual
2-12