Download Maxtor AVE MVDR-5000 Instruction manual

1.4 ALARM In / Out
DISK FULL
ALARM OUT
ALARM RESET
RECORD IN
GROUND
5
4
9
3
8
2
7
1
6
ALARM1 IN
ALARM4 IN
ALARM2 IN
ALARM3 IN
The above figure is the rear view.
7.
for CH 3
1.
GND: Ground Contact.
2.
ALARM OUT (OUTPUT): This is an
8.
external devices such as buzzers or
9.
5V
0V(Active)
3. DISK FULL (OUTPUT): This is a disk full
output trigger. Connect this to external
devices such as buzzers or lights.
5V
0V(Active)
ALARM
RESET
(INPUT):
This
pin
connects to an alarm-clear device for
clearing an alarm.
5V
0V(Active)
RECORD IN (INPUT): This pin connects
to a record trigger device for starting a
record.
5V
0V(Active)
6.
ALARM4 IN (INPUT): This is an alarm
input
ALARM1 IN (INPUT): same as the above,
for CH 1
lights.
5.
ALARM2 IN (INPUT): same as the above,
for CH 2
alarm output trigger. Connect this to
4.
ALARM3 IN (INPUT): same as the above,
(for
CH
4),
which
can
be
programmed in the menu system to
Normally Open or Normally Closed.
5V
0V(Active)
8