1
Download Evolution EVO2-50 Specifications
Transcript
3 ADJUSTING THE SPRING PRELOAD To adjust the spring preload, use the procedure described below. Loosen counter-ring 1, rotate ring 2 clockwise to increase the spring preload (and consequently the shock absorber preload) or anticlockwise to decrease it. After obtaining the desired preload, turn counter-ring 1 until it stops against adjusting ring 2. 2 1 ADJUSTMENTS For standard calibration, refer to page 11. GB NOTE: for movement of the rings use a specific sector key with square pin SUSPENSION ADJUSTMENT ACCORDING TO THE MOTORCYCLIST’S WEIGHT The following table shows the approximate calibration of the suspension adjustment according to the motorcyclist’s weight. w < 70 Kg 70 Kg < w < 80 Kg 80 Kg < w Adjustment Adjustment Adjustment Fork Shock absorber Fork Shock absorber Fork Standard Standard + 5 turns preload + 1,5 turns preload + 10 turns preload 32 Shock absorber + 3 turns preload
