Download MSI Eclipse PLUS - Motherboard - ATX User`s manual
Transcript
M S-7520 M ainboard Serial ATA Connector: SATA1~10 This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device. SATA1~6 stack SATA connectors are supported by ICH10R SATA1_3 SATA2_4 SATA5_6 SATA7 SATA8 SATA7 & 8 are controlled by 1st JMB322 SATA9 SATA10 SATA9 & 10 are controlled by 2nd JMB322 Important 1. Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission. 2. Please always use the Intel default Black SATA connectors (SATA1~6) first. 3. SATA7 & SATA8, SATA9 & SATA10, support RAID 0/ RAID 1/ JBOD function and you can set RAID mode in BIOS setup or in DRIVE BOOSTER MANAGER (refer to the BIOS section or Appendix section). 2-20