Download Eaton 9E10Ki Operating instructions

UPS System Installation
NOTE
The Eaton 9E–20 model has battery strings installed on two shelves. The Eaton
9E–30/20 and Eaton 9E–30/30 models have battery strings installed on three
shelves.
6.
Repeat Step 3 through Step 5 for each battery shelf (see Figure 4-23) to complete the battery string
connections.
7.
Reinstall the internal safety shield panel removed in Step 2.
8.
Close the outside door and secure the latch.
Bottom Internal Safety Shield Panel
(Batteries are located
behind safety shield.)
Figure 4-22. Battery Location
4-24
Eaton 9E UPS (20–30 kVA, 208/220V) Installation and Operation Manual 164202124—Rev 5
www.eaton.com/powerquality