Download Meyer Sound SIM 3 User guide
Transcript
CHAPTER 1 SIM 3 Measurement Terminology CHAPTER 1: SIM 3 MEASUREMENT TERMINOLOGY A number of different terms are used within SIM 3, either to describe concepts of acoustic measurement or to name specific methods and features in the hardware and software. This section will define these key terms as they relate to SIM 3 and its functions. SOURCE INDEPENDENT MEASUREMENT (SIM): Pioneered by Meyer Sound, SIM is a Meyer Sound trademark for a highly developed analyzer for source independent measurement. The technique is a dual-channel acoustical analysis method in which the excitation signal may be independent of — not generated or determined by — the measurement system. Source independent measurement uses faster, high-resolution algorithms that substantially decrease errors and achieve more precision than conventional dual-FFT techniques. It provides the information required to verify the components of a sound system including frequency and phase response, polarity, distortion, dynamic range, coverage and more. BRANCH: Branches are the key to the power and flexibility of the SIM 3 audio measurement system. In SIM 3, a branch consists of three measurement points: Console, Processor, and Microphone (defined below). SIM 3 is continuously and simultaneously measuring all three points of the Live Branch — the complete audio pathway from source to microphone currently selected for measurement. Measurements are taken at: ■ Console: The audio input into the sound reinforcement system (source), typically the output of a mixing console or other source. ■ Processor: The audio output from the signal-processing chain that lies between the console output and the amplifier input. Typically this chain includes equalizers and delay lines. This measurement point is exactly the same as the input to the amplifier / loudspeaker. ■ Microphone: The output of a measurement microphone located at some position in the venue that captures the audio from the loudspeaker(s) within the room. The SIM 3 software user interface allows an unlimited number of branches — each containing a Console, Processor, and Microphone measurement point — to be defined and selected as the Live Branch. Measurements begin as soon as the branch is selected, and are displayed in a variety of ways. The SIM 3 analyzer has its own front-panel connectors, and can also add specialized multichannel line and microphone switchers for even greater flexibility. Via these devices, SIM 3 can be connected to all points of interest in the sound reinforcement system. As long as a branch contains all three measurement points, any combination can be created. By selecting any defined branch within the SIM 3 software, the user can easily switch between and measure different parts of the system without having to physically re-patch connections. See "Chapter 3: SIM 3 Configurations and Branches" for further details. 3