Download Bosch NurseCall Main Unit User manual

48
en | Programming
NurseCall Main Unit
7.
If you have selected PAGING, you should
select the protocol (ESPA 4.4.4, DeTeWe or
MEP).
X
Use the
8.
Confirm your selection with
9.
and
keys for selection.
¡
.
If you have activated the DeTeWe protocol,
you should program the first number (0-9).
X
X PAGING
ESPA 4.4.4.
Use the
and
X 1.NUM. ---> 1
keys for selection.
10. If you have activated the ESPA 4.4.4 protocol, you should program the identification
number (0-9) of the paging system and the
XPAGING ESPA 4.4.4.
ID PAG.:2 ID NCALL:1
NurseCall system (0-9).
X
Use the
and
and the
keys for field selection
and
keys for value
changing.
11. Confirm your selection with
.
12. Decide how many characters per information
(criterion, floor, room, bed, position) should
be transmitted to the paging/DECT system
(filter function).
X
Use the
and
and the
keys for field selection
and
keys to change the
value. You can choose 0-11 characters for
CRITERION
<CRIT 09 + 3 SPACES
the criterion, followed by 0-9 spaces.
13. Press
to set the filtering of floor/room/
bed (or single number).
X
and
Use the
and the
keys for field selection
and
keys for values
changing.
14. Press
INFO.: fff
rrr 00b
FL:3+3 +RO:3+1 +BE:3
to set the filtering of the position
(only if Localization Mode is activated).
X
Use the
and
keys for number of
spaces (0-9) changing.
953.92 | v1.0 | 2007.07
User Manual
BE POS xyz
SPACES : 1
TeleAlarm SA®