Download ViewSonic VX510-1 Service manual
Transcript
Service Manual ViewSonic VX510-1 Model No. VS10090 15” Color TFT LCD Display (VX510_SM_833 Rev. 1a May 2004) ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583 Copyright Copyright ¤ 2004 by ViewSonic Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes. Trademarks Optiquest is a registered trademark of ViewSonic Corporation. ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners. Revision History Revision Date 1a 05/27/04 Description Of Changes Initial Release DCN-4473 Approval Angela Lu Confidential - Do Not Copy ViewSonic Corporation i VX510 TABLE OF CONTENTS 1. Precautions and Safety Notices 1 2. Specification 4 3. Front Panel Function Control Description 10 4. Circuit Description 16 5. Adjusting Procedure 17 6. Trouble Shooting Flow Chart 28 7. Recommended Spare Parts List 32 8. Exploded Diagram And Spare Parts List 35 9. Block Diagram 38 10. Schematic Diagrams 39 11. PCB Layout Diagrams 46 Confidential - Do Not Copy ViewSonic Corporation ii VX510 1. Precautions and Safety Notices 1. Appropriate Operation (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Turn off the product before cleaning. Use only a dry soft cloth when cleaning the LCD panel surface. Use a soft cloth soaked with mild detergent to clean the display housing. Use only high quality and safety approved AC/DC power cord. Disconnect the power plug from AC outlet if the product is not used for a long period of time. If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. Do not touch the LCD panel surface with sharp or hard objects. Do not place heavy objects on the LCD display, video cable, or power cord. Do not use abrasive cleaners, waxes or solvents for your cleaning. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic field. - Place in direct sunlight. 2. Caution No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar with all of the following safety checks and servicing guidelines. 3. Safety Check Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is exposed in such areas as the associated transformer circuits. 4. LCD Module Handling Precautions 4.1 Handling Precautions (1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when inserting or disconnecting from input connector. (3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. (7) Do not open nor modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module to any directions. (9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. Confidential - Do Not Copy ViewSonic Corporation 1 VX510 (12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. (13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. (14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit. 4-2 Handling and Placing Methods Correct Methods Incorrect Methods Only touch the metal frame of the LCD panel or the front Surface of the LCD panel is pressed by fingers. That may cover of the monitor. Do not touch the surface of the cause “mura”. polarizer. Take out the monitor with cushions. Take out the monitor by grasping the LCD panel. That may cause “mura”. Confidential - Do Not Copy ViewSonic Corporation 2 VX510 Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That may scratch the surface of the panel, or cause “mura”. The panel is placed face-down on the lap. That may cause “mura”. Confidential - Do Not Copy ViewSonic Corporation 3 VX510 2. Specification GENERAL REQUIREMENTS 2-1. GENERAL SPECIFICATION Test Resolution & Frequency Test Image Size 1024x768 @ 60Hz Full Size Factory Default: Contrast = 70%, Brightness = 100% Contrast and Brightness Controls 2-2. VIDEO INTERFACE Analog Input Connector Digital Input Connector Default Input Connector Video Cable Connector DB-15 Pin out DB-15 (Analog), DVI-D (Digital) :N/A Defaults to the first detected input Compliant DDC 1/2B 1.Video RGB (Analog) Separate, Composite, and Sync on Green 75 Ohms (Analog) Not compatible with interlaced video Video Signals Video Impedance Exclusions 2-3. POWER SUPPLY Internal Power Supply Input Voltage Range Input Frequency Range Short Circuit Protection Over Current Protection Leakage Current Efficiency Fuse Power Dissipation Part Number: DIAPAR002D22 90 to 264 VAC 47.5 to 63 Hertz Output can be shorted without damage 8 A typical at 5 VDC 0.7mA (Max) at 254VAC / 60Hz 75% typical at 115VAC Full Load Internal and not user replaceable 18.5Watts (typ),30Watts(Max.) 2-4. ELECTRICAL REQUIREMENT Horizontal / Vertical Frequency Horizontal Frequency Vertical Refresh Rate Maximum Pixel Clock Primary Preset 30 – 60 KHz 50 – 75Hz. 80 MHz 1024x768 @ 60Hz Timing Table Timing Item 1 2 3 -- Analog -- Resolution 640 x 350 @ 70Hz, 31.5kHz 640 x 400 @ 70Hz, 31.5kHz 640 x 480 @ 60Hz, 31.5kHz Confidential - Do Not Copy ViewSonic Corporation 4 VX510 4 640 x 480 @ 67Hz, 35.0kHz 5 640 x 480 @ 72Hz, 37.9kHz 6 640 x 480 @ 75Hz, 37.5kHz 7 640 x 480 @ 85Hz, 43.27kHz 8 720 x 400 @ 70Hz, 31.5kHz 9 800 x 600 @ 56Hz, 35.1kHz 10 800 x 600 @ 60Hz, 37.9kHz 11 800 x 600 @ 75Hz, 46.9kHz 12 800 x 600 @ 72Hz, 48.1kHz 13 800 x 600 @ 85Hz, 53.7kHz 14 832 x 624 @ 75Hz, 49.7kHz 15 1024 x 768 @ 60Hz, 48.4kHz 16 1024 x 768 @ 70Hz, 56.5kHz 17 1024 x 768 @ 72Hz, 58.1kHz 18 1024 x 768 @ 75Hz, 60.0kHz 19 1024 x 768 @ 85Hz, 68.67kHz Remark: Fv: 76Hz ~ 85Hz can be supported, not guarantee. Changing Modes Maximum Mode Change Blank Time for image stability Note: 1. Excluding Auto Adjust” time 2. Under DOS mode (640 x 350, 720 x 400 & 640 x 400), there is no “Auto Adjust” feature. 3. The monitor needs to do “Auto Adjust” the first time a new mode is detected Under 5 seconds (Max), 1 seconds (Typ.),for recognized timings 1-2 seconds(Typ.),for under-recognized timings 2-5. LCD Panel Panel Characteristics Panel Type Type Active Size Pixel Arrangement Pixel Pitch Glass Treatment # of Backlights Backlight Life Luminance Condition: CT = 6500K, Contrast = Max, Brightness = Max Brightness Uniformity HANNSTAR HSD150SX84-G Color TFT Active Matrix XGA LCD 304.1 (H) x 228.1 (V) RGB Vertical Stripe 0.297 mm(H) x 0.297mm (V) Anti Glare (Hard coating 3H) 2 CCFL edge-light (1 top / 1 bottom) 40,000Hours (Typ) / 30,000 Hours (Min) 250 cd/m2 (Typ after 30 minute warm up) 200 cd/m2 (Min after 30 minute warm up) △L5=Max 1.3 △L5 = Maximum Luminance / Minimum Luminance Confidential - Do Not Copy ViewSonic Corporation 5 VX510 Contrast Ratio Color Depth Viewing Angle (Horizontal) Viewing Angle (Vertical) Response Time 10%-90% @ Ta=25°C 450:1 (Typ), 300:1 (Min) 262, 144 colors (6 bit panel) 120 deg @ CR>10, 150 deg @ CR>5 100 deg @ CR>10, 115 deg @ CR>5 25 ms (Tr +Tf ) (Typ) 35 ms (Tr +Tf ) (Max) 2-6. MECHANICAL Dimension (Desktop) Width Height Depth Depth (Head only) Monitor Weight 353.69 mm 387.69 mm 169.51 mm 59.5mm 3.4 kg / 7.5 lbs Ergonomics 20 DEGREES MINIMUM 5 degrees Tilt Up Tilt Down Package Specifications Width Height Depth Cross Weight 417 mm 480 mm 223 mm 5.1 kg / 11.2 lbs 2-7. ENVIRONMENTAL Environmental Operating Temperature Storage Temperature Operating Relative Humidity 0°C to +40°C -20°C to +60°C 10% to 80% RH Non-Condensing Storage Relative Humidity Operating Altitude Storage Altitude 10% to 90% RH Non-Condensing 0 to +3,000 meters 0 to +12,000 meters Confidential - Do Not Copy ViewSonic Corporation 6 VX510 2-8 Analog EDID Time: 08:46:29 Date: Fri Nov 14, 2003 ______________________________________________________________________ ______________________________________________________________________ VIEWSONIC CORPORATION EDID Version # 1, Revision # 3 DDCTest For: ViewSonic VX510 ______________________________________________________________________ ______________________________________________________________________ 128 BYTES OF EDID CODE: 0 1 2 3 4 5 6 7 8 9 ________________________________________ 0 | 00 FF FF FF FF FF FF 00 5A 63 10 | 19 64 01 01 01 01 01 0D 01 03 20 | 0E 1E 17 78 2A 71 D6 A2 56 49 30 | 96 24 13 4F 54 BF EE 00 01 01 40 | 01 01 01 01 01 01 01 01 01 01 50 | 01 01 01 01 64 19 00 40 41 00 60 | 26 30 18 88 36 00 30 E4 10 00 70 | 00 18 00 00 00 FF 00 50 33 30 80 | 30 33 30 31 30 30 30 30 31 0A 90 | 00 00 00 FD 00 32 50 1E 3C 08 100 | 00 0A 20 20 20 20 20 20 00 00 110 | 00 FC 00 56 58 35 31 30 0A 20 120 | 20 20 20 20 20 20 00 70 ______________________________________________________________________ (08-09) ID Manufacturer Name = VSC (11-10) Product ID Code = 6419 (12-15) Last 5 Digits of Serial Number = Not Used (16) Week of Manufacture = 01 (17) Year of Manufacture = 2003 (10-17) Complete Serial Number = See Descriptor Block (18) EDID Version Number = 1 (19) EDID Revision Number = 3 (20) VIDEO INPUT DEFINITION: Analog Signal 0.700, 0.300 (1.000 Vp-p) Separate Syncs, Composite Sync, Sync on Green Confidential - Do Not Copy ViewSonic Corporation 7 VX510 (21) Maximum Horizontal Image Size = 300 mm (22) Maximum Vertical Image Size (23) Display Gamma (24) Power Management and Supported Feature(s): = 230 mm = 2.20 Active Off/Very Low Power, Preferred Timing Mode Display Type = R/G/B Color (25-34) CHROMA INFO: Red X - 0.634 Green X - 0.285 Blue X - 0.144 White X - 0.310 Red Y - 0.339 Green Y - 0.587 Blue Y - 0.075 White Y - 0.330 (35) ESTABLISHED TIMING I: 720 X 400 @ 70Hz (IBM,VGA) 640 X 480 @ 60Hz (IBM,VGA) 640 X 480 @ 67Hz (Apple,Mac II) 640 X 480 @ 72Hz (VESA) 640 X 480 @ 75Hz (VESA) 800 X 600 @ 56Hz (VESA) 800 X 600 @ 60Hz (VESA) (36) ESTABLISHED TIMING II: 800 X 600 @ 72Hz (VESA) 800 X 600 @ 75Hz (VESA) 832 X 624 @ 75Hz (Apple,Mac II) 1024 X 768 @ 60Hz (VESA) 1024 X 768 @ 70Hz (VESA) 1024 X 768 @ 75Hz (VESA) (37) Manufacturer's Reserved Timing: None Specified (38-53) Standard Timing Identification: Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used Confidential - Do Not Copy ViewSonic Corporation 8 VX510 ______________________________________________________________________ (54-71) Detailed Timing / Descriptor Block 1: 1024x768 Pixel Clock: 65.00 MHz ______________________________________________________________________ Horizontal Image Size: 304 mm Vertical Image Size: 228 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Time: 1024 pixels Blanking Time: 320 pixels Sync Offset: 24 pixels Sync Pulse Width: 136 pixels Border: 0 pixels Frequency: 48.36 KHz Vertical: Active Time: 768 lines Blanking Time: 38 lines Sync Offset: 3 lines Sync Pulse Width: 6 lines Border: 0 lines Frequency: 60.00 Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) ______________________________________________________________________ (72-89) Detailed Timing / Descriptor Block 2: Monitor Serial Number: P30030100001 ______________________________________________________________________ (90-107) Detailed Timing / Descriptor Block 3: Monitor Range Limits: Min Vertical Freq - 50 Hz Max Vertical Freq - 80 Hz Min Horiz. Freq - 30 KHz Max Horiz. Freq - 60 KHz Pixel Clock - 80 MHz Secondary GTF - Not Supported ______________________________________________________________________ (108-125) Detailed Timing / Descriptor Block 4: Monitor Name: VX510 (126) No Extension EDID Block(s) (127) CheckSum OK Confidential - Do Not Copy ViewSonic Corporation 9 VX510 3. Front Panel Function Control Description Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Main Menu With OnView controls Front Control Panel shown below in detail Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen. Displays the Main Menu or exits the control screen and saves adjustments Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Power light Green = ON Orange = Power Saving Power On/Off 2 1 Confidential - Do Not Copy ViewSonic Corporation 10 VX510 Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens disappear automatically after about 30 seconds. 2 To select a control you want to adjust, press ▲ or ▼ to scroll up or down the Main Menu. 3 After the control is selected, press button [2]. A control screen like the one shown below appears. The line at the bottom of the screen tells you what you can do next: Exit or select the Brightness control. Contrast 1: Exit 4 5 2: Brightness To adjust the control, press the up ▲ or down ▼ buttons. To save the adjustments and exit the menu, press button [1] twice. The following tips may help you optimize your display: • Adjust your computer's graphic card so that it outputs a video signal 1024 x 768 @ 60 Hz to the LCD display. (Look for instructions on “changing the refresh rate” in your graphic card's user guide.) • If necessary, make small adjustments using H POSITION and V POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.) Confidential - Do Not Copy ViewSonic Corporation 11 VX510 Main Menu Controls Adjust the menu items shown below by using the up ▲ and down ▼ buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: 1. Auto Image Adjust works with most common video cards. If this function does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. 2. The Auto Image Adjust and most Manual Image Adjust functions are not available for DVI input. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Confidential - Do Not Copy ViewSonic Corporation 12 VX510 Control Explanation Color Adjust provides several color adjustment modes: preset color temperatures and RGB which allows you to adjust red (R), green (G), and blue (B) separately. The factory setting for this product is 6500K (6500 Kelvin). Color Adjust SRGB 9300K 6500K 5400K User Color sRGB — sRGB is quickly becoming the industry standard for color management, with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled. 9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K — Adds red to the screen image for warmer white and richer red. 5400K — Adds green to the screen image for a darker color. User Color — Individual adjustments for red (R), green (G), and blue (B). 1 2 To select color (R, G or B) press button [2]. To adjust selected color, press ▲ or ▼. Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. Confidential - Do Not Copy ViewSonic Corporation 13 VX510 Control Explanation Information displays the timing mode (video signal input) coming from the graphics card in your computer. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE: VESA 1024 x 768 @ 60 Hz (recommended) means that the resolution is 1024 x 768 and the refresh rate is 60 Hertz. Information H. Frequency: V. Frequency: Pixel Clock: Resolution: Model No. : Serial No. : 31.47 KHz 31.47 Hz 24.80 MHz 640 x 480 www.viewsonic.com 1: Exit Manual Image Adjust displays the Manual Image Adjust menu. Manual Image Adjust H . / V . Position H . Size Fine Tune Sharpness 1: Exit 2 : Select The Manual Image Adjust controls are explained below: Horizontal Position moves the screen image left or right. Vertical Position moves the screen image up or down. Horizontal Size adjusts the width of the screen image. Fine Tune sharpens focus by aligning the illuminated text and/ or graphic characters. Sharpness adjusts the clarity and focus of the screen image. Confidential - Do Not Copy ViewSonic Corporation 14 VX510 Control Explanation Setup Menu displays the menu shown below. Setup Menu Language Select Resolution Notice OSD Position OSD Time Out OSD Background 1: Exit The Setup Menu controls are explained below: Language allows you to choose the language used in the menus and control screens. Resolution Notice displays the Resolution Notice menu shown below. RESOLUTION NOTICE For best picture quality, change the resolution to 1024 x 768 Press "1" to clear message Press "2" to disable message 1 : Exit Resolution Notice advises the optimal resolution to use. OSD Position allows you to move the on-screen display menus and control screens. OSD Timeout sets the length of time an on-screen display screen is displayed. For example, with a “15 second” setting, if a control is not pushed within 15 seconds, the display screen disappears. OSD Background allows you to turn the On-Screen-Display background on or off. Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide. Exception: This control does not affect changes made with the User Color control, Language and Power Lock setting. Confidential - Do Not Copy ViewSonic Corporation 15 VX510 4. Circuit Description MCU The Winbond W78E65 is an 8-bit microcontroller which has in-system programmable FLASH EPROM for firmware updating. The instruction set of the W78E65 is fully compatible with the standard 8052. The W78E65 contains a 64K bytes of main FLASH EPROM to be updated by the loader program located at the 4KB auxiliary FLASH EPROM; four 8-bit ib-directional and bit-addressable I/O ports; three 16-bit timer/counters; a serial port. The W78E65 allows user to modify firmware by using ISP function. Once the code is confirmed, the user can protect the code for security. RTD2011B The RTD2011B is a graphic processing IC for Liquid Crystal Display (LCD) monitors, It support up to 110MHz (XGA@85Hz). On-chip functions include a 8-bit triple-channel 110MHz ADC, PLL, 8-bit, a high quality zoom scaling engine, Sharpness/Smooth filter enhancement, digital color processor, embedded on-screen display (OSD) controller support multi-language. In output interface, it can support TTL, Reduced Swing Differential Signaling (RSDS) data bus type 1~3.and programmable TCON function. DDC VS HS R/G/B RTD2011B Flat Panel Display Video Decoder 1C 8D IIC 24.576MHz TCON 5C 48D LCD Panel Row/Column Driver 5C 48D TTL Signal LCD Panel 48D 5C RSDS Signal LCD Panel MCU Confidential - Do Not Copy ViewSonic Corporation 16 VX510 5. Adjusting Procedure 1. Function Test 1.1 Product - 15” LCD monitor 1.2 Test Equipment -Color Video Signal & Pattern (or PC with XGA resolution) 1.3 Test Condition Before function test and alignment, each LCD monitor should be warmed up for at least 30 minutes with the following conditions: (a) In room temperature, (b) With full-white screen, RGB, and Black (c) With cycled display modes, 640*480 (H=43.27kHz, V=85Hz) 800*600 (H=53.7kHz, V=85Hz) 1024*768 (H=68.67, V=85Hz) 1.4 Test Display Modes & Pattern 1.4.1 Compatible Modes 1. 640 x 350@ 70Hz, 31.5kHz 2. 640 x 400@ 70Hz, 31.5kHz 3. 4. 640 x 480@ 60Hz, 31.5kHz 640 x 480@ 67Hz, 35.0kHz 5. 640 x 480@ 72Hz, 37.9kHz 12. 800 x 600@ 72Hz, 48.1kHz 13. 800 x 600@ 85Hz, 53.7 kHz 14. 832 x 624@ 75Hz, 49.7kHz 15. 1024 x 768@ 60Hz, 48.4kHz 16. 1024 x 768@ 70Hz, 56.5kHz 17. 1024 x 768@ 72Hz, 58.1kHz 18. 1024 x 768@ 75Hz, 60.0kHz 19. 1024 x 768@ 85Hz, 68.67kHz 6. 640 x 480@ 75Hz, 37.5kHz 7. 640 x 480@ 85Hz, 43.27kHz 8. 720 x 400@ 70Hz, 31.5kHz 9. 800 x 600@ 56Hz, 35.1kHz 10. 800 x 600@ 60Hz, 37.9kHz 11. 800 x 600@ 75Hz, 46.9kHz Confidential - Do Not Copy ViewSonic Corporation 17 VX510 1.4.2 Function Test Display Pattern Item Test Content 1 Frequency & Tracking 2 Contrast/Brightness 3 4 5 6 7 Pattern Fine Line Moire 16Gray Scale Specification Eliminate visual wavy noise. 16 gray levels should be distinguishable. Boundary Horizontal & Vertical Horizontal and Vertical position Thickness Of video should be adjustable to Be within the screen frame. RGB Color Performance RGB Color Intensities Contrast of each R,G,B,color Should be normal. Screen Uniformity & Flicker Full White Should be compliant with the spec. Dead Pixel/Line White Screen & Dark Screen The numbers of dead pixels should Be compliant with the spec. White Balance White & Black Pattern The screen must have the pure white And black pattern, no other color. Confidential - Do Not Copy ViewSonic Corporation 18 Remark Figure1 Figure2 Figure3 Figure4,5,6 Figure7 Figure7,8 Figure9 VX510 Confidential - Do Not Copy ViewSonic Corporation 19 VX510 1.5 Function Test and Alignment Procedure 1.5.1 All Modes Reset You should do “Memory Recall’’on Main Menu first.This action will allow you to erase all end-user’s settings and restore the factory defaults. 1.5.2 Auto lmage Adjust Please select and enter“Auto Image Adjust’’function on Main menu to see if it workable. The“Auto Image Adjust’’function is aimed to offer a better screen quality by builtIn ASIC . For optimum screen quality, the user has to adjust each function manually. 1.5.3 Firmware Test Pattern:Burn In Mode -Mark sure the F/W is the latest version. 1.5.4 DDC Test Pattern:EDID program -Make sure it can pass test program. 1.5.5 Fine Tune and Sharpness Test Signal:1024*768@60Hz Test Pattern:Line Moire Pattern -Check and see if the image has noise and focus performs well.Eliminate visual line bar. -If not,readjust by the following steps: (a) Select and enter“Fine Tune’’function on“Manual Image Adjuet’’to adjust the image to adjust the image to eliminate visual wavy noise. (b) Then, selsct and enter“Sharpness’’fnuction to adjust the clarity and focus. 1.5.6 Boundary Test Signal:1024*768@60Hz Test Pattren:Horizontal & Vertical Line Thickness Pattern -Check and see if the image boundary is within screen frame. -If not, readjust by the following steps: (a) Select and enter “Manual Image Adjuet’’ function on OSD Main Meun. (b) Then, select and enter“Horizontal Size’’or“Horizontal/Vertical Position’’ function to adjust the video boundty to be full scanned and within screen frame. Confidential - Do Not Copy ViewSonic Corporation 20 VX510 1.5.7 White Balance Test Signal:640*480@60Hz Test Pattern:White and Black Pattern 1.5.8 RGBColors Contrast Test Signal:1024*768@60Hz Test Pattern:R,G,B,Color Intensities Pattern and 16 Gray Scale Pattern -Check and see if each color is normal and distinguishable. -If not,please return the unit to repair area. 1.5.9 Screen Uniformity and Flicker Test Signal:1024*768@60Hz Test pattern:Full White Pattern -Check and see if it is in normal condition. 1.5.10 Dead Pixel and Linegnal Test Signal:1024*768@60Hz Test Pattern: Dark and White Screen Pattern -Check and see if there are dead pixels on LCD panel with shadow gauge and filter film. -The total numbers and distance of dead pixels should be compliant with the spec. 1.5.11 Mura Test Pattern:White,GRB,Black,&Gary Test Tool:5%ND Filter. 1.5.12 Check for Secondary Display Modes Test Signal: Analog:640*350@70Hz;640*480@60/67/72/75/85Hz 720*400@70Hz;800*600@56/60/72/75/85Hz 832*624@75Hz,1024*768@60/70/72/75/85Hz -Normally when the primary mode1024*768@60Hz is well adjusted and compliant with the specification,the secondary modes will also be compliant with the spec.But we still have to check with the general test pattern to make sure every secondary is compliant with the specification. 1.5.13 All Modes Reset After final QC step,we have to erase all saved changes again and restore the factory defaults.You should do“All mode Reset’’again. 1.5.14 Power Off Monitor Turn off the monitor by pressing“Power’’ button. Confidential - Do Not Copy ViewSonic Corporation 21 VX510 2 Adjusting Procedure - Firmware Upgrade Procedure When you receive the returned monitor, please check whether the firmware version is the latest. If not, please do the following procedures to upgrade it to the latest version. 2-1 Equipment Needed -VX510 Monitor -Fixture for Firmware upgrade -Power adapter *1 for Fixture -VGA Cable *2 -PC (Personal Computer) -Com port Cable *1 -Firmware Upgrade program -One additional monitor for checking the program execution VX510 Fixture VGA Cable PC Confidential - Do Not Copy ViewSonic Corporation 22 VX510 Com port Cable Power Adapter for Fixture 2-2 Setup Procedure 2.2.1 Connect P3 of fixture with Com port of PC by Com port Cable. 2.2.2 Connect P1 of fixture with VX510 Monitor by VAG Cable. 2.2.3 Connect P2 of fixture with PC VGA output by VAG Cable. 2.2.4 Plug Power Adapter to fixture. 2.2.5 Connect Power Card to VX510 Monitor. 2.2.6 Connect PC to the additional monitor. JP1:to Power Adapter Confidential - Do Not Copy ViewSonic Corporation 23 VX510 2.2.7 Run “RTDTOOL”file 2.2.8 Choose ”Winboad 62/65B” and then push “SET” button Confidential - Do Not Copy ViewSonic Corporation 24 VX510 2.2.9 Push “File Bin” button and then choose the latest firmware that we want to upgrade Confidential - Do Not Copy ViewSonic Corporation 25 VX510 Step 1. Let VX510 enter ISP mode 1.1 Press Menu key (keep on) than plug power to VX510 monitor after 2-3 second, and release away Menu key. 1.2 Press “Connect ” then enter the ISP mode.(software will show “Link success¨ if we enter the ISP mode successful) Confidential - Do Not Copy ViewSonic Corporation 26 VX510 Step 2 Push “Program” button and start to enter upgrade process Step 3. Upgrade successful Confidential - Do Not Copy ViewSonic Corporation 27 VX510 6. Trouble Shooting Flow Chart This chapter provides technicians and people who have an electronic background a primary description about maintaining the product. Moreover, you can get the appropriate operation to solve some complicated problems of component repairing and professional problems. 1. Equipment Needed - VX510 Monitor Philips Screw Driver # 101 and # 107 Electronic Hex Nut M5 mm PC with XGA resolution 2. Main Procedure Start Power-on No A. Power LED OK ? Power Circuit Troubleshooting Yes No Is Display B. Performance Troubleshooting Performance OK? Yes No C. Is Function Function Troubleshooting adjustment OK? Yes End Confidential - Do Not Copy ViewSonic Corporation 28 VX510 2.1 A. Power Circuit Troubleshooting Start Change No Change Video Board Power Board Yes End 2.2 B. Performance Troubleshooting Start Yes Is screen Black ? Yes Change Power No Board No Change Yes Change Video LCD Board Panel No Yes Is screen White ? Replug or Yes Change No FFC cable No Change Yes Change Video LCD Board Panel No Yes Abnormal Color ? No Yes Change Change Video LCD Board Panel No 1 Confidential - Do Not Copy ViewSonic Corporation 29 VX510 1 Yes Is Lcd line defective ? Change Lcd Panel No Yes Mura ? Change Lcd Panel No Yes Yes Is screen scrolling ? No Change Change VGA Cable Video Board No Yes Yes Change Is screen flickering ? Change Video Board No Lcd Panel No Yes Change Bad uniformity ? Yes Power Board No Change Lcd Panel No Yes Change Have line bar or Yes Power Board noise ? Change Video Board No No Yes Yes Ghost image ? Notice Yes 1 Adjust sharpness or Yes Notice Change 2 Video Board auto No No No No End Confidential - Do Not Copy ViewSonic Corporation 30 VX510 Notice: 1. Make sure VGA cable connected to PC directly, not via anything like “data transfer “ or “ distribution". After this action if ghost image disappears , go to “ yes”; else go to “ no”. 2. Check the compatibility on the computer. If it is compatibility problem, feedback the information to ViewSonic ; else , go to “ no” 2.3 C. Function Troubleshooting Start No Change Button Board Change Video Board Yes End Confidential - Do Not Copy ViewSonic Corporation 31 VX510 7. Recommended Spare Parts List VX510 Recommended Spare Parts List Item 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 VS P/N N/A M-SCW-0824-0856 N/A B-CB-0206-0189 C-FP-0301-0997 N/A M-BK-0805-0082 M-MS-0808-9478 M-SCW-0824-0857 M-SCW-0824-0858 M-SCW-0824-0859 M-LCD-0826-0225 B-VB-0202-0355 B-PS-0204-0072 M-MS-0808-9479 M-FC-0809-0816 M-MS-0808-9480 TBD TBD TBD TBD M-FC-0809-0817 M-SCW-0824-0860 N/A M-SCW-0824-0861 M-MS-0808-9481 M-MS-0808-9482 M-MS-0808-9483 M-WR-0828-0757 C-BC-0302-0600 N/A M-SCW-0824-0862 M-CV-0830-0324 M-CV-0830-0325 M-CV-0830-0326 M-MS-0808-9484 M-MS-0808-9485 M-BK-0805-0083 M-BK-0805-0084 M-MS-0808-9486 M-MS-0808-9487 M-MS-0808-9488 TBD M-SCW-0824-0862 M-CV-0830-0327 M-CV-0830-0328 Arima P/N K0015001000000 700473300-1000 K0015012000000 40-VF000T-C000 K0015028000000 K0015028000001 K5120000000003 K5120000000010 703014250-2500 702114300-0600 700114303-0800 37-125150-4900 40-VF0009-C000 83-110119-0000 32-000080-0000 K5052000000000 77X014006-4800 K5120000000012 700114406-0800 K5310000000008 K5110000000015 21-5H0001-0000 702472300-0800 K0015013000000 700374400-1200 K5110000000014 K5120000000004 K5120000000006 21-5W0000-0000 K0015028000002 K0015013000001 700114401-0800 K5110000000005 K5110000000006 K5110000000009 K5110000000011 K5110000000013 K5120000000001 K5120000000002 K5120000000007 K5120000000009 K5120000000011 K5120000000013 700114401-0800 K5110000000007 K5110000000008 Description BASIC UNIT VX510 SCREW TAPPING 3.0*10L P-HEAD P-TITE-ZN/B LCD PANEL ASSY VX510 PWA BUTTON BOARD VF000 BEZEL SUB-ASSY VX510 CHASSIS SUB-ASSY VX510 CHASSIS FRAME VX510 SHIELDING VX510 SCREW PH M2.5*0.45 L4(DIA=4.5 T=0.8) SCREW MACHINE M3*6L B HEAD NI SCREW M3*8L P-HEAD W/SP+FLATE WASHER NI LCD TFT 15.0" XGA HSD150SX84-G HANNSTAR PWA VIDEO BOARD VF000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 CORE PL2508IG 25.5*15*4.5mm FOR VF000 CABLE ASSY FFC (40*56) VX510 STANDOFF#4-40 H4.8(L7.0 THREAD)HEXA-4.75 INSULATOR FOR SHIELDING VX510 MACHINE SCREW M4*L8 PH W/EX TOOTH WASHE LABEL FOR WARNING-HIGH VOLTAGEL VX510 AL FOIL FOR INVERTER WIRE OF PANEL VX510 CABLE ASSY HARNESS 8P*8P 140mm W/VF000 TAPPING SCREW 3.0*8L B HEAD P TITE Zn YL REAR COVER ASSY VX510 SCREW TAPPING 4.0*12L P-HEAD B-TITE N RUBBER WALL MOUNT PLUG(BLACK) VX510 PLATE HINGE VX510 PLATE WALL MOUNT VX510 WIRE 1015 #18 AWG 100mm DA7835 GR/YEL COVER BACK SUB-ASSY VX510 STAND ASSY VX510 SCREW MACHINE M4*8L P-HEAD W/SP WASHER BASE-TOP (SILVER) VX510 BASE BOTTOM (BLACK) VX510 COVER FRONT BASE(BLACK) VX510 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 RUBBER FOOT(GRAY)VX510 BRACKET L VX510 BRACKET R VX510 PLATE WEIGHT L(172.13) VX510 PLATE WEIGHT S(78.3) VX510 HINGE VX510 PORON FOR PLATE WEIGHT VX510 SCREW MACHINE M4*8L P-HEAD W/SP WASHER COVER FOR AC D-SUB (BLACK) VX510 COVER FOR BASE CABLE (BLACK) VX510 42 43 44 45 46 47 48 49 50 51 52 53 54 55 N/A A-VC-0101-0378 A-PC-0106-0328 M-MS-0808-9496 M-LB-0813-1005 M-LB-0813-1006 M-LB-0813-1007 M-LB-0813-1008 M-LB-0813-1009 M-LB-0813-1010 M-LB-0813-1011 P-BX-0601-0975 P-FM-0602-0878 P-FM-0602-0879 M-MS-0808-9489 K0015014000003 21-5D0000-0000 21-900212-0000 K0015020000000 K5310000000001 K5310000000002 K5310000000003 K5310000000004 K5320000000001 K5320000000002 K5320000000003 K5510000000001 K5550000000001 K5550000000002 K5551000000001 PACKING KIT VSA/VSAP (M) VX510 CABLE ASSY D-SUB 15P H/D 9C W/CORE AC POWER CORD USA 3C BLACK W/VF000 VIEWSONIC QSG W/CD W/PE BAG VX510 SMALL LABEL 40*25 VX510 ID LABEL 108*48.9 VX510 UPC LABEL 76.2*76.2 VX510 HI-POT PASS LABEL VX510 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX LOGO BIRD FRONT(E015 004)AL7.9H VX510 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX GIFT BOX VX510 POLY FOAM L VX510 POLY FOAM R VX510 PE BAG W420*H550 VX510 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 weeks 30 days 3 weeks 2 weeks 2 weeks 2 weeks 2 weeks 10 days 10 days 10 days 10 days 2 weeks 2 weeks 10 days 56 57 TBD P-BX-0601-0976 AAF155500025J0 K5510000000002 PLASTIC HANDLE FOR SOTEC A0561 PLAIN GIFT BOX VX510 1 1 3 weeks 10 days 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Q'ty 1 6 1 1 1 1 1 1 6 9 1 1 1 1 2 2 2 2 1 1 1 1 10 1 2 4 1 4 1 1 1 4 1 1 1 2 6 1 1 1 2 1 2 2 1 1 Confidential - Do Not Copy ViewSonic Corporation 32 Lead Time 10 days 2 weeks 4 weeks 3 weeks 3 weeks 10 days 10 days 10 days 8 weeks 2 weeks 45 days 45 days 30 days 10 days 2 weeks 10 days 2 weeks TBD 30 days 10 days 10 days 2 weeks 3 weeks 3 weeks 45days 4 weeks 10 days 4 weeks 4 weeks 4 weeks 4 weeks 2 weeks 3 weeks 3 weeks 3 weeks 3 weeks 3 weeks 2 weeks 10 days 4 weeks 4 weeks VX510 VX510 BOM VX510-1 BOM Item ViewSonic P/N 1 #N/A 2 M-SCW-0824-0856 3 #N/A 4 B-CB-0206-0195 5 #N/A 6 #N/A 7 #N/A 8 #N/A 9 C-FP-0301-0997 10 C-FP-0301-1036 11 M-CV-0830-2570 12 PL-BT-0706-0175 13 M-MS-0808-9742 14 #N/A 15 #N/A 16 M-MS-0808-9479 17 M-BK-0805-0082 18 M-MS-0808-9478 19 M-SCW-0824-0857 20 M-SCW-0824-0858 21 M-SCW-0824-0859 22 M-LCD-0826-0225 23 #N/A 24 #N/A 25 #N/A 26 #N/A 27 #N/A 28 #N/A 29 #N/A 30 #N/A 31 #N/A 32 #N/A 33 #N/A 34 #N/A 35 #N/A 36 #N/A 37 #N/A 38 #N/A 39 #N/A 40 #N/A 41 #N/A 42 #N/A 43 #N/A 44 #N/A 45 #N/A 46 #N/A 47 #N/A 48 #N/A 49 #N/A 50 #N/A 51 #N/A 52 #N/A 53 #N/A 54 #N/A 55 #N/A 56 #N/A 57 #N/A 58 #N/A 59 #N/A 60 #N/A 61 #N/A 62 #N/A 63 #N/A 64 #N/A 65 #N/A 66 #N/A Reference P/N K0015001000000 700473300-1000 K0015012000000 40-VF000T-B100 36-020071-0000 37-018365-1300 39-316008-0600 41-VF000T-B000 K0015028000000 K5110000000001 K5110000000003 K5110000000004 K5110000000010 702374300-0800 K0015028000001 32-000080-0000 K5120000000003 K5120000000010 703014250-2500 702114300-0600 700114303-0800 37-125150-4900 40-VF0009-A100 10-002011-9700 10-007865-9500 12-107414-8300 14-63855L-7000 14-678553-7000 18-001117-7700 18-003904-9000 18-008815-7700 18-109435-9900 20-000042-8700 20-090099-8800 20-100202-0200 30-000006-9500 30-001016-9500 30-001026-9500 30-001036-9500 30-001056-9500 30-002016-9500 30-002226-9500 30-004726-9500 30-006816-9000 30-008226-9500 30-175016-9500 30-202026-9500 30-202206-9500 30-202216-9500 30-362204-8700 31-103306-9500 31-132268-1200 31-164737-9500 31-201049-9500 31-231068-1200 31-301003-9500 31-302006-9500 31-302206-9500 31-364704-8300 31-481059-9500 31-942278-1300 31-A31078-1200 32-700603-1900 32-731206-6000 35-240002-4000 35-245762-4010 Description BASIC UNIT VX510 SCREW TAPPING 3.0*10L P-HEAD P-TITE-ZN/B LCD PANEL ASSY VX510 PWA BUTTON BOARD VF000 TACT SW TC-0102X 160gf DIP LED 319YGW-C Y/G ROUND 2.9mm DIP CONN PLUG R/A 8P P:2mm 86808-0800 DIP PCB BUTTON BOARD VF000 Rev:B BEZEL SUB-ASSY VX510 BEZEL (BLACK) VX510 COVER MIDDLE (SILVER ) VX510 BUTTON (SILVER) VX510 LENS FOR POWER LED (CLEAR) VX510 SCREW TAPPING 3.0*8L B-HEAD B-TITE NI CHASSIS SUB-ASSY VX510 CORE PL2508IG 25.5*15*4.5mm FOR VF000 CHASSIS FRAME VX510 SHIELDING VX510 SCREW PH M2.5*0.45 L4(DIA=4.5 T=0.8) SCREW MACHINE M3*6L B HEAD NI SCREW M3*8L P-HEAD W/SP+FLATE WASHER NI LCD TFT 15.0" XGA HSD150SX84-G HANNSTAR PWA VIDEO BOARD VF000 IC RTD2011B FLAT LCD CONTROLLER QFP-208 IC W78E65P-24/40 8BIT uCONTROLLER PLCC44 IC 74LVC14AD SO-14 IC 24LC21AT/SN 1K(128*8) 2.5V SOP-8 IC M24C16-WMN6T 16K(2K*8) 2.5V SOP-8 IC LM1117MPX-3.3 REGULATOR SOT-223-3 TR NPN MMBT3904 40V 200mA 225mW SOT-23 IC AME8815BEGT250 1.5A REGULATOR SOT-223 MOSFET P-CH CEM9435A 30V 5.3A SOP-8 DIODE ZENER UDZS5.6B 5.6V 200mW SMD DIODE ARRAY BAV99 SWITCHING SOT-23 DIODE SW TWIN DAN202U UMT 1.25*2.0 RES CHIP 0ohm J 0603 RES CHIP 100ohm J 0603 RES CHIP 1Kohm J 0603 RES CHIP 10Kohm J 0603 RES CHIP 1Mohm J 0603 RES CHIP 200ohm J 0603 RES CHIP 2.2Kohm J 0603 RES CHIP 4.7Kohm J 0603 RES CHIP 680ohm J 0805 RES CHIP 8.2Kohm J 0603 RES 75 +-5% 1/16W 0603 RES CHIP 1/16W 2Kohm 5% 0603 RES CHIP 1/16W 22ohm 5% 0603 RES CHIP 1/16W 220ohm 5% 0603 200ppm RES ARRAY CHIP 22ohm*4 J 1206 CAP CERA CHIP 50V 33pF 5% X7R 0603 CAP ELEC 16V 22uF M S5016M0022S5D DIP CAP CERA CHIP 16V 47nF K X7R 0603 CAP CERA CHIP 50V 100nF Z Y5V 0603 CAP ELEC CHIP 16V 10uF M 16CV10BS CAP CERA CHIP 50V 10pF D NPO 0603 TDK CAP CERA CHIP 50V 20pF 5% NPO 0603 CAP CERA CHIP C0G 50V 220J 0603(22PF) CAP ARRAY CHIP 47pF*4 J NPO 1206 CAP CERA CHIP 10V 1uF +80%/-20% Y5V 0603 CAP ELEC 25V 220uF 20% 105'C 8*11mm L.I CAP ELEC 16V 100uF M 6*5mm DIP W/CUT BEAD CHIP 19ohm 0.5A SBK160808T-190Y-S BEAD CHIP 60ohm 0.5A SBY321611T-600Y-S X'TAL 24MHz 20pF 20ppm 49S 6B24000377 X'TAL 24.576MHz 6B24500292 W/CUT 3.4mm Confidential - Do Not Copy ViewSonic Corporation 33 Q'ty 1 6 1 1 5 1 1 1 1 1 1 1 1 8 1 2 1 1 6 9 1 1 1 1 1 1 1 1 2 5 1 1 6 3 1 7 27 3 3 1 1 2 18 2 1 3 2 16 3 9 2 4 3 43 1 5 1 16 9 3 1 3 3 7 1 1 VX510 VX510-1 BOM Item 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 ViewSonic P/N #N/A #N/A #N/A #N/A #N/A B-PS-0204-0072 M-FC-0809-0816 M-FC-0809-0817 M-SCW-0824-0860 #N/A M-SCW-0824-0861 M-MS-0808-9481 M-MS-0808-9482 M-MS-0808-9483 M-WR-0828-0757 C-BC-0302-0600 C-BC-0302-0618 M-MS-0808-9743 #N/A M-SCW-0824-0862 M-CV-0830-0324 M-CV-0830-0325 M-CV-0830-0326 M-MS-0808-9484 M-MS-0808-9485 M-BK-0805-0083 M-BK-0805-0084 M-MS-0808-9486 #N/A M-MS-0808-9487 M-MS-0808-9488 M-SCW-0824-0862 M-CV-0830-0327 M-CV-0830-0328 #N/A A-VC-0101-0378 #N/A M-MS-0808-9496 #N/A M-LB-0813-1005 M-LB-0813-1006 M-LB-0813-1007 M-LB-0813-1008 #N/A #N/A M-LB-0813-1009 M-LB-0813-1010 M-LB-0813-1011 P-BX-0601-0975 P-FM-0602-0878 P-FM-0602-0879 M-MS-0808-9489 #N/A M-MS-0808-9558 #N/A Reference P/N 38-020044-0300 38-418015-3J00 38-527040-0700 39-316008-0600 41-VF0009-A000 83-110119-0000 K5052000000000 21-5H0001-0000 702472300-0800 K0015013000000 700374400-1200 K5110000000014 K5120000000004 K5120000000006 21-5W0000-0000 K0015028000002 K5110000000002 K5120000000005 K0015013000001 700114401-0800 K5110000000005 K5110000000006 K5110000000009 K5110000000011 K5110000000013 K5120000000001 K5120000000002 K5120000000007 K5120000000008 K5120000000009 K5120000000011 700114401-0800 K5110000000007 K5110000000008 K0015014000001 21-5D0000-0000 21-900214-0000 K0015020000000 K0015020000001 K5310000000001 K5310000000002 K5310000000003 K5310000000004 K5310000000006 K5310000000007 K5320000000001 K5320000000002 K5320000000003 K5510000000001 K5550000000001 K5550000000002 K5551000000001 K5551000000002 AAF155500025J0 AA905310000810 Description SOCKET PLCC 44PIN SMD CS224410000 CONN D-SUB 15P R/A H/D A02003-11 DIP CONN FPC R/A 40P P:0.5mm BOT 88532-4003 CONN PLUG R/A 8P P:2mm 86808-0800 DIP PCB VIDEO BOARD VF000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 CABLE ASSY FFC (40*56) VX510 CABLE ASSY HARNESS 8P*8P 140mm W/VF000 TAPPING SCREW 3.0*8L B HEAD P TITE Zn YL REAR COVER ASSY VX510 SCREW TAPPING 4.0*12L P-HEAD B-TITE N RUBBER WALL MOUNT PLUG(BLACK) VX510 PLATE HINGE VX510 PLATE WALL MOUNT VX510 WIRE 1015 #18 AWG 100mm DA7835 GR/YEL COVER BACK SUB-ASSY VX510 COVER BACK (BLACK) VX510 PLATE K LOCK VX510 STAND ASSY VX510 SCREW MACHINE M4*8L P-HEAD W/SP WASHER BASE-TOP (SILVER) VX510 BASE BOTTOM (BLACK) VX510 COVER FRONT BASE(BLACK) VX510 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 RUBBER FOOT(GRAY)VX510 BRACKET L VX510 BRACKET R VX510 PLATE WEIGHT L(172.13) VX510 PLATE WEIGHT M(107.83) VX510 PLATE WEIGHT S(78.3) VX510 HINGE VX510 SCREW MACHINE M4*8L P-HEAD W/SP WASHER COVER FOR AC D-SUB (BLACK) VX510 COVER FOR BASE CABLE (BLACK) VX510 PACKING KIT VSCN (G) VX510 CABLE ASSY D-SUB 15P H/D 9C W/CORE AC POWER CORD CHINA 3C CCC BLACK W/VF000 VIEWSONIC QSG W/CD W/PE BAG VX510 WARRANTY CARD W/STICKER,BAG VSCN(G) CN SMALL LABEL 40*25 VX510 ID LABEL 108*48.9 VX510 UPC LABEL 76.2*76.2 VX510 HI-POT PASS LABEL VX510 QC-PASS LABEL VX510 CARTON STICKET LABEL VX510 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX LOGO BIRD FRONT(E015 004)AL7.9H VX510 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX GIFT BOX VX510 POLY FOAM L VX510 POLY FOAM R VX510 PE BAG W420*H550 VX510 PE BAG OF CARTON VX510 PLASTIC HANDLE FOR SOTEC A0561 LABEL SECURITY FOR BOE A0062 Confidential - Do Not Copy ViewSonic Corporation 34 Q'ty 1 1 2 2 1 1 2 1 8 1 2 4 1 4 1 1 1 1 1 4 1 1 1 2 6 1 1 1 2 2 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VX510 ViewSonic Corporation 8. Exploded Diagram And Spare Parts List 35 Confidential - Do Not Copy VX510 VX510-1 Exploded Part List Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ViewSonic P/N C-FP-0301-1036 M-CV-0830-2570 PL-BT-0706-0175 M-MS-0808-9742 M-BK-0805-0082 M-MS-0808-9478 M-MS-0808-9481 M-MS-0808-9482 M-MS-0808-9483 C-BC-0302-0618 M-MS-0808-9743 M-CV-0830-0324 M-CV-0830-0325 M-CV-0830-0326 M-MS-0808-9484 M-MS-0808-9485 M-BK-0805-0083 M-BK-0805-0084 M-MS-0808-9486 M-MS-0808-9487 M-MS-0808-9488 M-CV-0830-0327 M-CV-0830-0328 M-LB-0813-1009 M-LB-0813-1010 M-LB-0813-1011 B-CB-0206-0195 B-VB-0202-0361 B-PS-0204-0072 M-LCD-0826-0225 Reference P/N K5110000000001 K5110000000003 K5110000000004 K5110000000010 K5120000000003 K5120000000010 K5110000000014 K5120000000004 K5120000000006 K5110000000002 K5120000000005 K5110000000005 K5110000000006 K5110000000009 K5110000000011 K5110000000013 K5120000000001 K5120000000002 K5120000000007 K5120000000009 K5120000000011 K5110000000007 K5110000000008 K5320000000001 K5320000000002 K5320000000003 40-VF000T-B100 40-VF0009-B200 83-110119-0000 37-125150-4900 Description BEZEL (BLACK) VX510 COVER MIDDLE (SILVER ) VX510 BUTTON (SILVER) VX510 LENS FOR POWER LED (CLEAR) VX510 CHASSIS FRAME VX510 SHIELDING VX510 RUBBER WALL MOUNT PLUG(BLACK) VX510 PLATE HINGE VX510 PLATE WALL MOUNT VX510 COVER BACK (BLACK) VX510 PLATE K LOCK VX510 BASE-TOP (SILVER) VX510 BASE BOTTOM (BLACK) VX510 COVER FRONT BASE(BLACK) VX510 CLAMP FOR AC D-SUB CABLE(PIN GOOD)CKK 05 RUBBER FOOT(GRAY)VX510 BRACKET L VX510 BRACKET R VX510 PLATE WEIGHT L(172.13) VX510 PLATE WEIGHT S(78.3) VX510 HINGE VX510 COVER FOR AC D-SUB (BLACK) VX510 COVER FOR BASE CABLE (BLACK) VX510 NAME PLATE VIEWSONIC FRONT(E015-016-1)VX LOGO BIRD FRONT(E015 004)AL7.9H VX510 LOGO VIEWSONIC ELLIPTIC BACK E015-017 VX PWA BUTTON BOARD VF000 PWA VIDEO BOARD VF000 AC POWER SUPPLY&DC-AC INVERTER W/VF000 LCD TFT15.0'' XGA HSD150SX84-G HANNSTAR Confidential - Do Not Copy ViewSonic Corporation 36 Q'ty 1 1 1 1 1 1 4 1 4 1 1 1 1 1 2 6 1 1 1 2 1 1 1 1 1 1 1 1 1 1 VX510 Packing for shipping VX510-1 Packing Part List Item ViewSonic P/N 1 P-FM-0602-0878 2 M-MS-0808-9489 3 A-VC-0101-0378 4 M-MS-0808-9489 5 A-PC-0106-0336 6 P-FM-0602-0879 Reference P/N K5550000000001 K5551000000003 21-5D0000-0000 K5551000000003 21-900214-0000 K5550000000004 Description GIFT BOX VX510 POLY FOAM R 01 VX510 CABLE ASSY D-SUB 15P H/D 9C W/CORE PE BAG W420*H650 VX510 AC POWER CORD CHINA 3C CCCBLACK W/VF000 POLY FOAM L 01 VX510 Confidential - Do Not Copy ViewSonic Corporation 37 Q'ty 1 1 1 1 1 1 VX510 IICSDA 24C16 IICSCL BOTTOM BOARD 5DVCC VRMT U5 8051MCU CONNECT DDC_SDA STANDBY_LED ACTIVE_LED POWER_KEY MENU_KEY UP_KEY SELECT_KEY DOWN_KEY RTD_RESET RTD_SDO/SDI RTD_SCLK RTD_SCSB DDC_SCL 5DVCC UDDC1 24C21 PANEL INTERFACE VX510 U4 Confidential - Do Not Copy Block Diagram VGA5V DARED/GRN/BLU[2..7] VGA INPUT R G B ECLK U7 RTD2011B HSIN VSIN DBRED/GRN/BLU[2..7] 38 OCLK U8 TCON0--REV TCON1--STH TCON3--LOAD TCON4--OE TCON7--POL TCON8--STV1 TCON9--STV2 TCON10--CPV VBRI PANEL_3VCC DC TO DC 5DVCC PCB:41-VF0009-C000 PWA:40-VF0009-C ViewSonic Corporation PLL_3PVCC ADC_3AVCC POWER&INVERTER BOARD RTD_3DVCC RTD_3DVCC TMDS_3AVCC 74LVC14 RTD_2.5DVCC 9. 10. Schematic Diagrams AME8815BEGT250 U1 GND 2 4 3 RTD_2.5DVCC 2.5DVCC 1 1 VOUT_1 VOUT_2 C86 2 VIN 1 3 0.1UF_Y5V 100UF/EC16V6.3H5.2 2 C85 DGND RTD_3DVCC JP1 3DVCC 1 2 3 4 5 6 7 8 3 BKLT-EN BKLT-PWM U2 2,3,4 3 FEB_1206 OUT_2 OUT_1 ADJ/GND LM1117MPX-3.3 C6 C3 220UF/25V C4 100UF/EC16V6.3H5.2 2 0.1UF_Y5V L3 2 2 0.1UF_Y5V 4 2 IN 2 C5 1 HEADER 8/SM 1 1 3AVCC1 3 TMDS_3AVCC 3AVCC2 3 ADC_3AVCC 3PVCC 3 PLL_3PVCC 1 5DVCC 1 L2 DGND FEB_1206 2,3,4 DGND BGND 5DVCC 1 R1 4.7K 200 2 2 220 2 VRMT 2 2,3,4 5DVCC R2 1K NA 10UF/16V DGND 2 5DVCC PANEL_PW3 R4 1 4.7K 2 1 2 R93 1 1K 2 3 2 1 3 2 B C Q2 'E MMBT3904 1 PANEL_3VCC is used by RSDS UPMOS1 CEM9435 2 DGND PANEL_3VCC is used by X87 1 C83 1 . S , G D D. .. D, 8 7 6 5 U3 3 1 IN OUT_2 OUT_1 ADJ/GND 4 2 PANEL_3VCC C8 C9 100UF/EC16V6.3H5.2 LM1117MPX-3.3 4 C12 4 1 R5 1 0.1UF_Y5V 2 MMBT3904 2 C B 'E 1 2 Q1 2 3 C7 1UF_Y5V 1 1 1 1 R3 BKLT-EN DGND 2 R6 2.2K 0.1UF_Y5V DGND R9 1 BKLT-PWM 2.2K 2 2 2 1 3 C B C15 Q3 'E 1UF_Y5V MMBT3904 1 R10 2 1 22 2 VBRI 3 ViewSonic Corporation DGND Project Name : VX510 Size : A3 Title : LCD MONITOR Document Number : 40-VF0009-C000 Date: Monday, May 10, 2004 Confidential - Do Not Copy ViewSonic Corporation 39 VX710 Rev : C Sheet : 1 of 4 5DVCC 1 1,3,4 R11 0 U9 G690H_Reset_IC VIN VOUT 2 R99 0 1 R97 4.7K NA 5DVCCTEST SDA A2 SCL A1 GND A0 7 3 2 1 2 8 5 6 4 2 100 2 100 X24C16 R14 0 NA NA 2 DGND DGND 1 +C21 R16 1 R17 1 R18 1 R19 1 R20 1 R21 1 R22 1 R23 1 2 0 1 C20 0.1UF_Y5V DGND R98 1 Near to Chip 2 10uF_16V R24 8.2K 4.7K 2 4.7K 2 4.7K 2 4.7K 2 4.7K 2 4.7K 2 4.7K 2 4.7K 2 R25 43 42 41 40 39 38 37 36 44 R37 1 22PF 1 DGND 2 C22 10PF P0.0 P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7 32 P2.7 P2.6 P2.5 P2.4 P2.3 P2.2 P2.1 P2.0 31 30 29 28 27 26 25 24 EA_/VPP P4.3 PSEN_ STANDBY_LED 4 ACTIVE_LED 4 R32 1 22 2 CONNECT 3 R34 1 R35 1 2 1 1 33 24.000MHz 1M 2 C23 10PF 22 R36 0 22 2 2 1 2 C88 1 ALE/PROG_ 5DVCC Y1 2 2 35 20 U5 8051 Socket VSS P3.1 P3.0 12 2 100 13 2 100 11 RST P3.2 P3.3 P3.4 P3.5 P3.6 P3.7 22 R31 1 R33 1 14 15 16 17 18 19 XTAL1 DDC_SDA DDC_SCL P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7 21 3 3 2 3 4 5 6 7 8 9 VCC 10 MENU_KEY SELECT_KEY UP_KEY DOWN_KEY POWER_KEY 100 100 100 100 100 100 XTAL2 4 4 4 4 4 2 2 2 2 2 2 1 2 DGND 4.7K 1 PANEL_PW3 1 VRMT 3 RTD_RESET 3 RTD_SDO/SDI 3 RTD_SCLK 3 RTD_SCSB IICSCL IICSDA DGND 5DVCC 5DVCC R26 1 R27 1 R28 1 R29 1 R95 1 R96 1 2 2 1,3,4 1,3,4 C19 0.1UF_Y5V 2 1 1 NA R12 1 R13 1 IICSDA IICSCL 1 U4 1 3 5DVCC GND 1,3,4 2 MENU_KEY DGND 1,3,4 DGND ViewSonic Corporation Project Name : VX510 Size : A3 Date: Confidential - Do Not Copy ViewSonic Corporation 40 VX710 Title : LCD MONITOR Document Number : 40-VF0009-C000 Monday, May 10, 2004 Rev : C Sheet : 2 of 4 R3DVCC L4 R2.5DVCC L5 FEB_1206 1 C59 C60 C56 1 103 93 ADCR_VDD ADC_REFIO 128 1 122 121 DPLL_VDD DPLL_GND APLL1_VDD APLL1_GND 0.1UF_Y5V 123 118 C66 4 1 R60 OCLK 22 4 4 4 TCON0 TCON1 4 4 4 4 4 TCON3 TCON4 TCON8 TCON9 TCON10 2 1 1 R54 R55 119 67 116 21 22 30 31 56 57 66 2 2 22 22 2 2 22 2 22 2 22 2 22 22 1 1 1 1 1 R94 R56 R57 R58 R59 1 R61 ECLK 2 C69 22PF 2 4 2 C97 22PF 1 1 22 TCON7 2 C71 22PF 1 1 R62 1,2,4 2 33 34 35 36 22 RTD_SCLK RTD_SDO/SDI RTD_SCSB R63 1 1 R66 2 5DVCC 22 2 R65 DDC_SDA L14 FEB_1206 R68 U8B U8C 14 3 1 7 0.1UF_Y5V 4 1 R70 2 22 C74 7 5 6 7 74LVC14 74LVC14 0.1UF_Y5V 9 8 2 2 AHS DDC_SCL 4.7K 2 22 7 74LVC14 1 R71 74LVC14 DGND 5DVCC VGA5V 1 1 1 1 1 1 2 2 2 2 2 20 52 87 113 1 1 1 2 2 2 2 2 3 5 6 7 8 BCLKP BCLKN 10 11 DBGRN7/BG3P DBGRN6/BG3N DBGRN5/BG2P DBGRN4/BG2N DBGRN3/BG1P DBGRN2/BG1N 12 13 14 15 16 17 DBRED7/BR3P DBRED6/BR3N DBRED5/BR2P DBRED4/BR2N DBRED3/BR1P DBRED2/BR1N 23 24 25 26 28 29 1K 2 2 0 VBRI 1 RP1 5 6 7 8 22X4 4 3 2 1 DBBLU7 DBBLU6 DBBLU5 DBBLU4 4 4 4 4 RP2 5 6 7 8 22X4 4 3 2 1 DBBLU3 DBBLU2 DBGRN7 DBGRN6 4 4 4 4 RP3 5 6 7 8 22X4 4 3 2 1 DBGRN5 DBGRN4 DBGRN3 DBGRN2 4 4 4 4 RP4 5 6 7 8 22X4 4 3 2 1 DBRED7 DBRED6 DBRED5 DBRED4 4 4 4 4 CP1 CP2 DAN202U D9 47PFX4_5% 47PFX4_5% 47PFX4_5% 4 4 4 4 2 100 RP6 5 6 7 8 22X4 4 3 2 1 DABLU5 DABLU4 DABLU3 DABLU2 4 4 4 4 2 100 RP7 5 6 7 8 22X4 4 3 2 1 DAGRN7 DAGRN6 DAGRN5 DAGRN4 4 4 4 4 RP8 5 6 7 8 22X4 4 3 2 1 DAGRN3 DAGRN2 DARED7 DARED6 4 4 4 4 RP9 5 6 7 8 22X4 4 3 2 1 DARED5 DARED4 DARED3 DARED2 4 4 4 4 1 2 3 4 CP9 1 2 3 4 CP8 1 2 3 4 CP7 1 2 3 4 CP6 1 2 3 4 CP5 47PFX4_5% 47PFX4_5% 47PFX4_5% 47PFX4_5% 47PFX4_5% 2 1 2 R72 10K C75 R73 10K 2 0.1UF_Y5V 1 R74 1 R75 1 UDDC1 1 D10 2 5.6V_RLZ5.6B DDC_SCL DDC_SDA CP4 1 3 2 2 CP3 47PFX4_5% 8 7 6 5 2 R69 1 R50 1 1 DBRED3 DBRED2 DABLU7 DABLU6 2 100 1 4.7K R67 1 2 3AVCC1 R51 8 7 6 5 2 1 C73 1 1 71 68 22X4 4 3 2 1 U8D 2 14 2 14 REXT TMDS_TST/PWM1 8 7 6 5 U8A 70 82 83 69 RP5 5 6 7 8 NA VGAHS 14 2 DHS/TCON5/PWM2 DVS/TCON_OCLK DCLK/TCON_ECLK DEN/TCON7 AVS 22 TMDS_VDD3 RXCP RXCN TMDS_GND3 8 7 6 5 2 NA 78 79 80 81 8 7 6 5 1 R64 RTD2011B XO TCON11/VCLK TCON0/V0 TCON1/V1 TCON2/V2 TCON3/V3 TCON4/V4 TCON8/V5 TCON9/V6 TCON10/V7 C98 22PF 2 RTD_SCLK 2 RTD_SDO/SDI 2 RTD_SCSB 2 RTD_RESET VGAVS 1 PLL_TEST2 PLL_TEST1 / IRQ XI DGND 3DVCC 2 125 126 120 2 NA 1M 22PF 2 1 TMDS_VDD0 R0P R0N TMDS_GND0 DBBLU7/BB3P DBBLU6/BB3N DBBLU5/BB2P DBBLU4/BB2N DBBLU3/BB1P DBBLU2/BB1N Y2 24.576MHz 2 2 1 C68 1 2 R53 85 76 77 84 8 7 6 5 2 2 PLL_GND D8 5.6V_RLZ5.6B APLL3_VDD APLL3_GND 111 SCLK 112 SDIO 110 SCSB D7 5.6V_RLZ5.6B 10K 2PLL_TEST2 R52 1 2 22PF 1 D6 5.6V_RLZ5.6B 2 2 1 1 D5 5.6V_RLZ5.6B 2 D4 5.6V_RLZ5.6B CONNECT 1 1 1 HSIN VSIN DDC_SDA 2 0.1UF_Y5V PLL_GND 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 1 C67 0.1UF_Y5V DDC_SCL 2 2 2 22uF_16V DGND T_DPLL_VDD R1P R1N T_DPLL_GND APLL2_VDD APLL2_GND 124 127 ACLKN ACLKP C65 46 45 C64 DAGRN2/AG1N DAGRN3/AG1P DAGRN4/AG2N DAGRN5/AG2P DAGRN6/AG3N DAGRN7/AG3P C63 55 54 50 49 48 47 L13 FEB_1206 + C61 ADC_GND DARED2/AR1N DARED3/AR1P DARED4/AR2N DARED5/AR2P DARED6/AR3N DARED7/AR3P C62 1 3PVCC 1 1 1 ADC_GND 1 Near to Chip 64 63 62 61 59 58 PLL_AVCC 0.1UF_Y5V 0.1UF_Y5V 1 1 ADC_GND ADC_GND RIN 3 D3 1 1 0.1UF_Y5V DGND 1 C84 0.1UF_Y5V 22uF_16V 2 BAV99 2 1 2 D2 BIN 3 D1 2 0.1UF_Y5V 2 TMDS_VDD2 R2P R2N TMDS_GND2 0.1UF_Y5V 8 7 6 5 1 2 C58 ADC_GND 0.1UF_Y5V 0.1UF_Y5V 72 73 74 75 1 2 3 4 1 2 L12 FEB_1206 2 3AVCC2 1 1 0.1UF_Y5V 8 7 6 5 1 ADC_GND + C55 2 1 ADCB_VDD B ADCB_GND ADC_VDD SOG G ADCR_GND ADC_GND ADC_GNDOFF R SOG G+ 1M 2 Near to Chip C87 BAV99 1UF_Y5V 3 GIN 1 R+ 98 97 96 94 100 99 101 92 95 102 B+ NA ADC_AVCC BAV99 2 AHS AVS 1 C47 1 2 3 4 2 R48 104 105 C46 8 7 6 5 AHS AVS C45 1 2 3 4 ADC_GND C52 0.047UF_X7R R+ 1 2 2 100 1K C51 SOG 2 1 2 0.047UF_X7R C44 1 2 3 4 R47 1 C53 10PF C57 2 1 1 1 1 1 R46 1 2 ADC_AVCC 1,2,4 0.1UF_Y5V GNDK GNDK GNDK GNDK 2 100 C49 10PF 19 ohm 75 0.047UF_X7R ADC_GND G+ 1 2 C48 R44 1 2 2 0 ohm 1 L11 FEB_0603 R49 FEB_0603/0R 1 DGND DGND 3AVCC1 2 75 L10 0.1UF_Y5V 0.1UF_Y5V DABLU2/AB1N DABLU3/AB1P DABLU4/AB2N DABLU5/AB2P DABLU6/AB3N DABLU7/AB3P RIN 1 C38 Near to Chip 2 0 ohm 1 L9 FEB_0603 R45 FEB_0603/0R 1 + C25 44 43 41 40 38 37 19 ohm L8 VGA_CON15 ADC_AVCC C37 0.047UF_X7R B+ 2 19 53 86 114 BIN GIN ADC_GND ADC_AVCC C36 100 VCCK VCCK VCCK VCCK 2 75 VGA5V 2 C42 10PF 51 65 91 109 4 18 32 39 CONNECT R42 1 0.1UF_Y5V VCCIO VCCIO VCCIO VCCIO VCCIO VCCIO VCCIO VCCIO RxD11 0 ohm 1 L7 FEB_0603 R43 FEB_0603/0R 1 C41 1 19 ohm L6 DGND DGND TxD VGA5V B BAGND G GAGND R RAGND C35 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V RESETB REFCLK/PWM0 DDCSDA DDCSCL DDC2SDA DDC2SCL DDC_SDA C34 22uF_16V 117 115 108 107 89 88 DDCSDA 12 C33 9 27 42 60 90 106 HSIN 13 HSIN C32 GNDIO GNDIO GNDIO GNDIO GNDIO GNDIO VSIN 14 VSIN 2 5 10 4 9 3 8 2 7 1 6 C31 DGND DGND 1,2,4 DGND DDCSCL 15 DDC_SCL C30 22uF_16V U6 2 C29 2 C39 22PF 1 C28 2 2K C27 2 R41 2K C40 20PF C26 2 R40 2 2 DGND 2.5DVCC + C24 2 1 3DVCC 2 1 VGAHS VGAVS 2 100 2 100 2 1 R38 1 R39 1 FEB_1206 Near to Chip Near to Chip 1 1 8 7 6 5 VGAVS 2 100 2 100 1 2 C76 33PF 1 C77 33PF VCC NC VSYNC NC SCL NC SDA GND 1 2 3 4 ViewSonic Corporation 24LC21MB Project Name : VX510 2 Size : A2 Title : LCD MONITOR Document Number : 40-VF0009-C000 Date: Monday, May 10, 2004 1 Confidential - Do Not Copy ViewSonic Corporation 41 VX710 Rev : C Sheet : 3 of 4 CN12J1 1 1,2,3 PANEL_3VCC R77 1 4.7K 2 R78 1 4.7K 2 R79 1 4.7K 2 R80 1 4.7K 2 R81 4.7K 2 JP2 UP_KEY DOWN_KEY SELECT_KEY MENU_KEY POWER_KEY_ 2 3 3 3 3 3 3 DBRED7 DBRED6 DBRED5 DBRED4 DBRED3 DBRED2 3 3 3 3 3 3 DBGRN7 DBGRN6 DBGRN5 DBGRN4 DBGRN3 DBGRN2 3 3 3 3 3 3 DBBLU7 DBBLU6 DBBLU5 DBBLU4 DBBLU3 DBBLU2 C81 UP_KEY DOWN_KEY SELECT_KEY MENU_KEY POWER_KEY 2 2 2 2 2 3 OCLK 1 C80 1 C79 1 C78 HEADER 8/SM 1 2 2 2 2 2 2 2 100 100 100 100 100 100 100 1 8 7 6 5 4 3 2 1 0 5DVCC 1 R82 1 R83 1 R84 1 R85 1 R86 1 R87 1 R88 1 R76 1 C82 2 2 2 2 2 DGND 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V 0.1UF_Y5V DGND 1 1,2,3 2 DGND DGND R89 680_0805 1 0211 ADD R100,R101 Q7 1 C B 'E 1 R91 2 3 3 3 3 TCON1 TCON3 TCON7 TCON0 3 3 3 3 TCON8 TCON9 TCON10 TCON4 DARED7 DARED6 DARED5 DARED4 DARED3 DARED2 3 3 3 3 3 3 DAGRN7 DAGRN6 DAGRN5 DAGRN4 DAGRN3 DAGRN2 3 3 3 3 3 3 DABLU7 DABLU6 DABLU5 DABLU4 DABLU3 DABLU2 3 ECLK STH LOAD POL REV STV1 STV2 CPV OE DGND CON40 CON40 C89 220 2 MMBT3904 3 3 3 3 3 3 5DVCC 1,2,3 4.7K R90 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 R100 2 C90 2 C91 2 C92 2 C93 2 C94 2 C95 2 C96 2 1 1 1 1 1 1 1 1 22PF 22PF 22PF 22PF 22PF 22PF 22PF 22PF 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 CN12J2 ACTIVE_LED 2 5DVCC 1,2,3 680_0805 2 1 R101 4.7K 2 3 Q8 MMBT3904 C B 'E 2 R92 1 220 2 STANDBY_LED 2 ViewSonic Corporation Project Name : VX510 1 Size : A3 Title : LCD MONITOR Document Number : 40-VF0009-C000 Date: Monday, May 10, 2004 Confidential - Do Not Copy ViewSonic Corporation 42 VX710 Rev : C Sheet : 4 of 4 IC004 NC R010 47R C009 471P/500V F001 3.15A/250V NTC1 SCK054 NF001 T002 NF002 3 4 3 4 VOUT 3 +12V (0.7A) 2 R011 47R L PIN VIN GND 1 C126 NC L001 1 12 11 14V (14.5A) CY001 222/Y2 R002 CX001 510K 0.47uF CY002 222/Y2 1 2 1 BD001 KBP206G 2 R003 510K R044 27K R009 120K R020 NC 0805 R021 NC 0805 R047 27K 3 8 5 10 6 7 Q003 3904 C005 0.47uF R008 C004 27K 1% 103 8 4 4 R039 JUMP R023 NC +5V (2A) C010 471P ZD003 6.2B ZD002 NC R041 1K R035 NC 7 D003 1N4148 6 6 R027 180 R014 51R Q001 2SK2645 2 8 C014 1000u10V C006 10uF/25V R034 2K 4 3 R015 2K 3 R028 560 C018 NC IC002A PC817 R031 15K R016 1K 3 IC002B PC817 5 R005 10K 2 1 C008 0.1uF C023 NC C003 NC R017 0.56 2W 2 5 1 C016 0.1uF C017 0.1uF 3 1 Q002 3906 R022 NC 1 R006 1K 47R C007 0.1uF C012 470uF/10V L002 R013 47R 7 IC001 1203 R012 CY003 222/Y1 C015 10u/25V D002 1N4148 C011 NC C027 1000u/10V R018 0 R045 10 R007 1K R004 10K C013 C019 470uF/25V 470uF/25V D004 PS1010R D001 1N4007 ZD001 16B D007 MBR10100 D006 MBR10100 2 N PIN VAR1 471 R019 NC 0805 C002 222K/1KV R001 510K C001 68U/450V 2 IC003 TL431 R032 820R SCR001 HXL1225 R040 10K C028 0.1uF R043 820R R033 91K ViewSonic Corporation Project Name : VX510 Size : B Date: Confidential - Do Not Copy ViewSonic Corporation 43 VX710 Title : LCD MONITOR Document Number : 83-110119-0000 Wednesday, May 12, 2004 Rev : A Sheet : 1 of 2 +14.5V CON102 CN08 +12V ON/OFF Diming Q102 DTA144WKA C101 C102 1UF 180u/25V +5V 4.3~7.9mA f=53K HV(LOAD)=730V HV(OPEN)=1650V R119 NC Q103 SST3904 1 S D 8 2 S D 7 3 S D 6 G D 5 4 ZD102 9.1B 1 R133 2.2K 1206 10 HV(OPEN)=1620V HV(LOAD)=90V 7 R142 2K 0805 R143 2K 0805 R124 15K 3 R116 470 1 R144 0 5 2 R141 9.1K R110 NC R139 39K R111 R109 15K 270 9 VCC 10 2OUT 11 12 2FBK 13 2IN- 14 S D 8 2 S D 7 3 S D 6 G D 5 4 6 PT102 EE-19 8 1 2 R136 2.2K 1206 ZD103 9.1B 1 R137 2.2K 1206 7 R148 2K 0805 2 R138 2.2K 1206 R149 2K 0805 4 D102 B140 Q112 SST3906 R126 15K R150 0 3 C122 0.22/250V PMS R120 470 5 C113 0.22/16V ZD104 9.1V R112 51K R115 270 R102 10K R113 15K 1 R154 100K Q114 3904 R155 C116 0.1u/25V 62K R106 5.1K R147 9.1K 2SD2150 R145 39K C119 0.01U/16V VX710 C120 0.1U/16V R151 100K 2 1 3 ViewSonic Corporation R152 100K Project Name : VX510 Size : B Confidential - Do Not Copy 44 R146 2.7K 3 D106 BAV99 C115 1U OPEN ViewSonic Corporation D105 BAV99 2 3 D104 BAV99 Q109 KTD1624C R153 100K 1 2 R127 13K C112 0.1U/16V R114 NC CON105 CN02 C125 22P/3KV HV(OPEN)=1690V R122 3.9K GND 1OUT 1 C118 0.1U/16V C117 0.01U/16V R135 2.2K 1206 8 7 1DTC 1FBK 6 5 1IN+ 1IN4 3 RT CT R123 NC Q111 SST3904 5.6K C111 2.2U/16V L102 150uH Q113 A04405 IC101 FP5451A 1 R104 2IN+ 15 SCP C109 2.2u/50V REF 16 C106 2.2U/16V 2DTC C107 0.1U/16V R107 NC R140 2.7K C108 0.22/16V R105 5.1K C110 0.001u/16V Q108 KFD1624C Q107 KTD1624C R108 51K C114 0.1u/16V 3 D103 BAV99 R125 13K R103 10K C105 1U OPEN 1 2 2 C121 0.22/250V PMS C104 0.1/25V CON103 CN02 C123 22P/3KV R132 2.2K 1206 D101 B140 Q104 SST3906 C103 0.1U/16V 6 PT101 EE-19 4 Q101 DTC144WKA R101 33K R131 2.2K 1206 R134 2.2K 1206 R118 3.9K 2 1 2 3 4 5 6 7 8 L101 150uH Q105 A04405 F101 0 1206 Title : LCD MONITOR Document Number : 83-110119-0000 Date: Wednesday, May 12, 2004 Rev : A Sheet : 2 of 2 Schematic Diagrams --Button Board CN1 1 2 3 4 5 6 7 8 GND LED_ORANGE LED_GRN POWER_KEY_ MENU_KEY UP_KEY AUTO_KEY DOWN_KEY HEADER 8/SM S1 S2 SL- D1 S4 SL+ LED/3P AUTO S5 POW 2 MENU 1 G 3 R S3 TOP O MENU DOWN(-) UP(+) AUTO POWER G ViewSonic Corporation Project Name : VX510 Size : A3 Title : LCD MONITOR Document Number : 40-VF000T-C000 Date: Monday, May 10, 2004 Confidential - Do Not Copy ViewSonic Corporation 45 VX710 Rev : C Sheet : 1 of 1 11. PCB Layout Diagrams Power Board PCB top view Confidential - Do Not Copy ViewSonic Corporation 46 VX510 Power Board PCB bottom view Confidential - Do Not Copy ViewSonic Corporation 47 VX510 Button Board PCB top view Confidential - Do Not Copy ViewSonic Corporation 48 VX510 *Readers Response* Dear Readers: Thank you in advance for your feedback on our Service Manual,which allows continuous improvement of our products. We would appreciate your completion of the Assessment Matrix below, for return to ViewSonic Corporation. Assessment A.What do you think about the content after reading VX510 Service Manual? U nit Ex cellent Fair G ood Bad 1. Precautions And Safety Notices 2. Specification 3. Front Panel Function Control Description 4. Circuit Description 5. Adjusting Procedure 6. Trouble Shooting Flow Chart 7. Recommended Spare Parts List 8. Exploded Diagram and Spare Parts List 9. Block Diagram 10. Schematic Diagrams 11. PCB Layout Diagrams B.Are you satisfied with the VX510 service manual? It em Ex cellent G ood Fair Bad 1. Service Manual Content 2. Service Manual Layout 3. The form and listing C.Do you have any other opinion or suggestion about this service manual? Readers basic data: Name: Title: Company: Add.: Fax: Tel: E-mail: After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes ([email protected]) Confidential - Do Not Copy ViewSonic Corporation 49 VX510