Download Moxa Technologies 331 User`s manual

Moxa C Programmable RTU Controllers
Getting Started
ioPAC 8020-C Series
Grounding Nut
ioLogik W5348 Series:
Grounding Nut
Powering on the RTU Controller
Connect the 12 to 36 VDC power lines from the power supply to the Moxa C programming RTU controller’s
power terminal block, and then power on the power supply attached to it. It takes about 30 to 60 seconds for
the system to boot up. Once the system is ready, the Ready LED will light up.
Power Terminal Block for ioLogik W5348-C Series
Power Terminal Block for ioPAC 8020-C Series
2-5