Download Work Pro ZENITH 600 Technical data

For the property owner
Operation
Operating time/24h HP 1-3
Indicates the compressor’s operating time for the last
24 hours. A new value is saved/displayed once every
24 hours. After first start,
50the
°C value is not shown until
24 hours have elapsed.
40°C
Starts/24h HP 1-3
Shows the number of starts
35°C the compressor has
performed during the last 24 hours. A new value is
saved/displayed once every 24 hours. After first start,
the value is not shown until 24 hours have elapsed.
9.4.1.2
Operation data Heating circuits 1-3
Operation EcoZenith
Active heat sources:
Heat pump, nbr of
1 (2)
Electric heater, kW
6.0 + 0.0
Stored oper data
Solar
This Wood
menu displays current temperatures and the
Ext Boiler
operation
data for the selected circuits.
Cooling
Heating circuit
The first figure indicates the current temperature, and
the value in brackets indicates the setpoint which the
Detailed oper data
heat pump is trying to achieve.
Primary flow 1°C
37 (38)
This shows the temperature supplied to heating circuit 1
(sensor B1) and the temperature that the circuit is trying to
Operation data heating
achieve. This value will vary during the year according to
the
parameters set and the current outdoor temperature.
T ºC
60
Return flow °C
20
40
This shows the temperature (sensor B7) of the water
20
that comes back from the heating circuit(s).
0
Heating
circ pump 1
(On/Off)
-20
Shows the operating
status
of
the
radiator
pump
(G1).
16
20
0
4
8
12
Out
Room1
Prim.flow1
Return
Room2
On, upper tank
On, lower tank
2°C
37 (38)
This shows the temperature supplied to heating circuit 2
(sensor B2) and the temperature that the circuit is trying
to achieve.
Select ID and OK for HP start
Heating
circ pump 2
(On/Off)
Shows the operating status of the radiator pump (G2).
Mixing valve 2
(Open/Close)
This indicates
whether
thepanels
mixing valve (Y2) increases
Operation
data solar
(opens) or reduces (closes) the heat supplied to heating
Status
Solar panel charge tank
circuit
2.°COnce the correct temperature
has been
Outlet
68
Inlet
°C
60
reached, the mixing valve’s motor then shuts down.
Pump Panel %
46
Pumptemp
Solar Charge
46
Room
3°C / %
Room temp cooling
°C21.9 (23.0)
Pump charge brine loop
Off
Depending on whether radiator circuit 3 or cooling is
Valve charging brine loop
Off
activated, this indicates the room temperature for heating
circuit 3/cooling (Room sensor B13). It does not indicate
whether combined heating/cooling has been selected.
48
CTC EcoZenith i550 Pro
Settings for heat pump id
Total operation time h:
Maximum primary flow °C:
Electric Heat kWh
Operating time h HP 1
Operating time/24h HP1
Starts/24h HP1
A1
149
51
Heating circuit
Primary flow 1°C
Return flow °C
Heating circ pump
Mixing valve
Primary flow 2°C
Heating circ pump 2
Mixing valve 2
Room temp 3°C / Room temp cooling °C
Primary flow 3°C / Primary flow cooling °C
Heating circ pump 3 / Pump cooling
Mixing valve 3 / Mixing valve cooling
37 (38)
20
On
Open
34 (35)
Off
Close
32 (32)
28 (29)
Off
Close
Heating circuit 1 is always the hottest, and other circuits are
mixedDetailed
down tooper
lowerdata
temperatures.
Tank upper °C
Tank lower °C
DHW tank ext °C
Ext. Buffer tank upper
Ext. Buffer tank lower
Current draw A
Add heat primary flow °C
Wood boiler °C
Flue gas wood boiler °C
Pool °C
60 (60) (40)
40 (43)
50
70
40
20
45
78
100
12 (35)
Prim.flow2
Mixing valve
(Open/Close)
Indicates whether the mixing valve (Y1) increases (opens)
Status heat pump
or reduces (closes). Once the correct temperature has
Id Product
Status
been
reached,
the mixing valve’s motor then shuts down.
A1 EcoPart
A2 EcoPart
Primary
flow
Stored oper data
Operation data heat pump
Compressor
Charge pump
Brine pump
Brine in/out °C
Fan speed
HP in/out °C
Outside temp. °C
Current L1
On
On 78%
On
4 / 1
On/48%
35/42
3
9.8