Download Eiki 8080 Owner`s manual

Advanced Playback from a CD or USB Flash Drive
2
Music CD
MP3/WMA (CD/USB) Use the [SKIP] buttons to select a
track to program.
Use the [SEARCH/FOLDER] buttons to select a
folder, then use the [SKIP] buttons to select a track
to program.
MEMORY
The selected track number and playback time
appear.
3
MEMORY
The selected track number and folder number appear.
Press the [PROG.] button.
The selected track is programmed to P-01.
MEMORY
4
Continue programming, if necessary.
Repeat steps 2 and 3. You can program up to 25 tracks (up to P-25).
5
Press the [PLAY/PAUSE] button.
PROGRAM
Playback starts from the track programmed as P-01.
The MEMORY indicator turns off and the PROGRAM indicator turns on.
The PROGRAM indicator turns on if any track has been programmed.
1
Stop playback to cancel the resume function, then press the [PROG.] button.
PROGRAM
2
Playback
Checking, deleting and adding programmed tracks
PROGRAM
The PROGRAM indicator flashes. The track number and
the program number appear. Then the playback time or
the folder number appears.
Press the [SEARCH] buttons.
Check the programmed tracks by pressing the [SEARCH] buttons repeatedly to increase or decrease the program
number.
When you finish checking the tracks, press the [PROG.] button or wait five seconds without operating the unit.
3
To add or delete programmed tracks, press the [STOP/CLEAR] button while checking the programmed tracks.
The MEMORY indicator turns on, and the unit enters programming/deleting mode.
The last programmed track number and its P (Program) number appear.
MEMORY
4
To delete programmed tracks, press the [STOP/CLEAR] button.
Repeatedly pressing the [STOP/CLEAR] button will delete the last programmed track one by one, and the previous
program number will appear on the display. When all programmed tracks are deleted, the PROGRAM indicator turns
off.
To add a track, repeat the steps described in Steps 2 and 3 in the “Program Playback” section.
5
Press the [PLAY/PAUSE] button.
Program Playback starts from track P-01.
CAUTION:
• All programmed data will be cleared when you open the disc cover, disconnect the USB flash drive, or turn off the
power to the unit.
• To play back tracks normally, delete all programmed tracks so that the PROGRAM indicator will turn off.
15