Download Ryobi P112 Specifications

Agriservices Mbombela 27/05/2014
VALVE FLOAT CORD AND NIPPLE SET
CN
R24.32
600090
1
Connector between the Apex float valve
arm and ball. Suitable for deep trough and
farm dams. Use with complete floats at
code 600032.
VALVE FLOAT WITH BALL EDUAN
407-VLOTTER
25MM
R141.31
1
Used at cribs for cattle and sheep. Working
pressure 25mm valve 50kPa = 21l/min and
200kPa = 48 l/min. Maximum pressure
500kPa.
Working pressure 40mm valve 30kPa = 76
l/min. Maximum pressure 400kPa.
VALVE FLOAT PUMP BUDDY APEX
WASHER WITH PLATE COBRA
VALVE FLOAT BRASS ECON TYPE
R42.00
333S093-15
15MM HP
10
333S093-20
20MM HP
10
R79.88
935015
15MM
1
935020
20MM
1
Plate with washer for replacement of
damaged part on taps.
935025
25MM
1
VALVE FLOAT ARM BRASS
Brass low-pressure ball valve for flow
control by tanks and reservoirs. Loose arms
at code 935120.
R62.28
R89.69
R174.52
WASHER TAP LEATHER LARGE
VALVE FLOAT HIGH PRESSURE BRASS
R929.56
600076
20MM
1
600077
25MM
1
R976.05
Tank inlet control device with variable min
and max water level settings. High volume
water inlet control, must be installed
horizontally. Working pressure 55 1000kPa (8 - 150 PSI). Reduces pump run
time and stop/start operations, save
electricity and increases pump life.
2040638
20MM
2040778
25MM
R41.32
R3.93
333760-015
286X15MM
1
R3.93
333760-020
340X20MM
1
10
10
Leather washer for replacement on cold
water taps.
333760-025
420X25MM
333760-032
422X32MM
333760-040
452X40MM
WASHER TAP RUBBER
333760-050
542X50MM
R48.11
R76.05
1
R136.95
1
R139.18
1
R145.64
1
VALVE FLOAT SPACE SAVER APEX
Brass arm for replacement on Agrinet lowpressure and high-pressure ball valves.
Float valves at codes 333700-020, 333710050.
VALVE FLOAT ARM BRASS ECON TYPE
Compact design for use in small or narrow
troughs or spaces. Two float positions to
allow for water level adjustments. Quality
acetyl construction with no metal
valve seat corrosion. Working pressure 0850kPa (120 PSI). Total length 270mm,
float included.
R91.36
333700-015
15MM
1
333700-020
20MM
1
333700-025
25MM
1
333700-032
32MM
1
333700-040
40MM
1
333700-050
50MM
1
R148.90
R243.18
R504.84
R523.55
R633.13
High-pressure brass ball valves with
recommended operating pressure between
200kPa and 2 000kPa. Replacement arm at
code 333760-025. Brass ball at code 332B200. Polyurethane balls at codes 332C3498, 332-C3548, 332-C3629. Plastic
ball at code 332-P125.
R6.53
333C097-15
15MM HD 20MM LD
10
333C097-20
20MM HD 25MM LD
10
333C097-25
25MM HD
10
333C098-15
15MM LD
10
R7.17
R8.64
R4.96
Rubber washer for replacement of
damaged washers on taps.
935120
15-25MM
R33.97
1
Brass ball valve arm for replacement on
ball valve. Complete valves at code
935020.
Prices are subject to change.
Page 51