Download Aritech ATS4000 Technical data

Expansion
Description
Amt.
Size
Memory – mounted in the slot on the mainboard, only one of the following modules.
ATS1830
1Mb – preinstalled
1
ATS1831
4Mb, IUM
ATS1832
8Mb, IUM
Outputs– mounted in available housing slots.
ATS1810
4 relay outputs.
1
B
ATS1811
8 relay outputs.
16
BB
ATS1820
16 open collector outputs.
16
B+
1.3.1.8
Listing of the most important parameters.
Table 1-22 DGP device list (RS485 bus devices)
Product
ATS1201
ATS1203
ATS1210
ATS1211
ATS1220
ATS1290
ATS1230
ATS1250
ATS1260
Description
8 zones (max.32) and 8 outputs (max.16) expander, integrated 2A
power supply, M type housing
8 zones (max.32) and 8 outputs (max.32) expander, integrated 3A
power supply, M type housing
8 zones and 8 outputs expander, plastic housing (ATS1644)
8 zones and 8 outputs expander, metal housing (ATS1643)
4 zones and 8 outputs expander, plastic housing (ATS1644)
32 addressable sensors expander
433MHz wireless device receiver (up to 32 sensors and 16 remotes),
plastic housing
4-doors access controller, integrated 4,5A power supply, L type
housing
4-elevators (64 floors) controller, set of ATS1250+firmware, requires
additional DGP modules
Table 1-23 Listing of the alarm zone DGP characteristics
Parameter
ATS1201
ATS1203
ATS1210/11
ATS1220
ATS1230
ATS1290
Onboard zones
Max. zones q-ty
Onboard outputs
Max. outputs q-ty
Siren output
Power supply
Housing
8
32
8 OC
16
Yes
230V AC
M
8
32
8 OC
32
Yes
230V AC
M
8
8
8 OC
16**
12V DC
ATS1643
ATS1644
B+
4
4
8 OC
16**
12V DC
ATS1643
32*
32*
12V DC
Plastic
32*
32*
32*
32*
12V DC
ATS1644
Circuit board size
A
A
*- addressable and wireless devices
**-output expansions possible only after replacing the housing
ATS Designers Guide
104x132x27
B+
-
B+
21