1
Download Brocade Communications Systems Converged Enhanced Ethernet 8000 Technical data
Transcript
2 dot1x authentication dot1x authentication Enables 802.1X on a port. Synopsis dot1x authentication no dot1x authentication Operands None Defaults None Command Modes Description Usage Guidelines Examples Interface configuration mode Use this command to enable dot1x on a port. Use the no dot1x authentication command to disable dot1x on the port and remove the configuration from 802.1X management. None To enable dot1x on a port: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#dot1x authentication See Also 50 None Converged Enhanced Ethernet Command Reference 53-1002508-01
