Download PV Powered 2500 Technical data

PVI 1800/PVI 2500(Rev A)
Installation and Operation Manual
NOTE: The inverter is set up with pre-wired AC and DC connections to make it very easy
and quick to connect to a DC disconnect to the left of the inverter and an AC disconnect to
the right. (Connections can also be made to junction boxes.)
2.3 Electrical Connection and Connection To Electrical
Utility Grid
Fig. 6 Simplified electrical connection diagram
Location and Mounting the Inverter
NOTE: Choose the inverter location keeping in mind where the disconnects, and/or
junction boxes and kWh meter (if needed) will be located. It is best to mark on the wall
(or create a diagram) where all of the components are to be located. The inverter is set up
with pre-wired AC and DC connections to make it very easy and quick to connect to a
DC disconnect to the left of the inverter and an AC disconnect to the right.
Refer to Figure 2 for Locations of Features, AC and DC Wires, etc.
WARNING: All electrical installations shall be done in accordance with all local electrical
codes and the National Electrical Code (NEC), ANSI/NFPA 70.
14
DOCR-070570-A