Download ADTRAN 4200659L7 User manual

Index
Power Fail 4-5
Power Low 4-5
Temp Critical 4-5
Temp High 4-5
Power Supply State menu 4-5
power up
AC version 2-2
DC version 2-2
PRF LED, active cards 2-14
PRF LED, standby cards 2-15
protection
circuit failure 7-1
network failure 7-1
Protection Configuration menus 3-5
Protection menu 4-7
protection mode 4-7
Circuit 4-7
circuit failure recovery 7-3, 7-4
Network 4-7
network failure recovery 7-4
None 4-7
non-redundant 7-2
Protection Threshold 3-11
PWR FAIL, DC connector symbol 2-3
PWR LED 2-13
R
rackmount installation 2-5
Read Community Name address 3-25
rear panel description 2-7
receiving inspection 2-1
redundancy 7-1
circuit and network failure recovery mode 74
circuit failure recovery mode 7-3
non-redundant mode 7-2
RET, DC connector symbol 2-3
return material authorization (RMA) vi
RMA requests viii
S
Save Configuration menu 3-43
Save on Logout menu 3-38
self test results 3-39
61200659L1-1
service viii
service interruption 7-3
Set Multiple menu selection 3-9
setting the baud rate 3-17
setting the date 3-35
setting the password 3-35
setting the time 3-35
Severely Errored Framing Seconds (SEFS) 5-7, 518
Severity Level menu 3-36
shipping, contents 2-1
short line length 3-3
SNMP Management Options 3-25
SNMP, overview 1-5
specifications, MX2800 B-1
Stand By, Card A/Card B 4-6
State menus, T1/E1 3-8
Statistics menu 5-1
24 Hour Alarm History (DS3) 5-2
Performance Parameters (DS3) 5-6, 5-16
Statistics menus 5-1
status LEDs 2-13
Status menu 4-1
Acknowledge Alarms (ACO) 4-12
Alarm (System State) 4-5
Card A/Card B 4-6
Card Comm 4-7
DS3 State 4-2
Power Supply State 4-5
Protection 4-7
System State 4-5
Status menus
DS3 State 4-2
Subnet Mask menu 3-14
Supply Failure, System State Alarm 4-6
switch cards, forcing the controller to 3-5
Switched, System State Alarm 4-6
Syslog Setup menu 3-36
system alarms 3-23
System Management menus 3-13
system reset 3-43
System Security menu 3-35
System State Alarm
Card Failure 4-6
Excessive Switches 4-6
MX2800 STS-1 User Manual
Index-5