Download DeLonghi AWR-MTD2-XE Technical data

AWR MTD2 XE
INDEX
1.
DESCRIPTION OF THE UNIT
3
2.
ELECTRONIC CONTROLLER
5
3.
OPERATING CHARACTERISTICS
6
4.
ACCESSORIES
11
5.
GENERAL TECHNICAL DATA
24
6.
OPERATING LIMITS
32
7.
ETHYLENE GLYCOL MIXTURE
33
8.
FOULING FACTORS
33
9.
HYDRAULIC DATA
33
10. MINIMUM AND MAXIMUM SYSTEM WATER CONTENT 34
11. VARIABLE SPEED SYSTEM PUMP CURVES
35
12. UTILITY WATER CIRCUIT CONNECTION DIAGRAM
38
13. ELECTRICAL DATA AT MAXIMUM CONDITIONS
ALLOWED (FULL LOAD)
38
14. FULL LOAD SOUND LEVEL
39
15. POSITION OF THE WATER CONNECTIONS
40
16. DIMENSIONAL DRAWINGS
41
17. CLEARANCES - HOISTING - SYMBOLS
41
18. OPERATING DIAGRAMS
42
This company participates in the Eurovent Certifi cation Programme.
The products are listed in the Directory of certifi ed products.
Eurovent certifi cation applied to units with cooling capacity up to 1500 kW
for air cooled water chillers and water cooled liquid chillers.
Company quality system
certified to UNI EN ISO 9001
and environmental certification
UNI EN ISO 14001
Waiver of liability
This document cannot be considered comprehensive for the purposes of: installation, operation, precautions against risks, handling
and transport. See the “General installation manual” for further information.
This document refers to standard configurations, in particular regarding dimensions, weights, electrical, refrigerant, water and air duct
connections (where applicable). For further information, drawings and diagrams contact the Climaveneta Sales Office.
Climaveneta accepts no liability deriving from the incorrect use of this document.
This publication is the sole property of Climaveneta, all reproduction, even partial, is prohibited.
The data contained in this publication may be changed without prior notice.
2
AWR_MTD2_XE_0011_0091_201109_EN
HFC 410A